Command Line Interface¶

nano_node commands¶

--account_create --wallet=`<wallet>`¶

Insert next deterministic key into <wallet>

--account_get --key=`<key>`¶

Get account number for the <key>

--account_key --account=`<account>`¶

Get the public key for <account>

--clear_send_ids¶

Remove all send IDs from the database (dangerous: not intended for production use)

--compare_rep_weights¶

Displays a summarized comparison between the hardcoded bootstrap weights and representative weights from the ledger. Full comparison is output to logs. Optional --data_path.

Differences between total weights (hardcoded weight and ledger weight) are due to unreceived (pending) blocks
mismatched:
- samples: the number of mismatched samples is equal to the number of hardcoded weights, even those with zero mismatch
- total: sum of the absolute difference between individual samples from hardcoded and ledger weights
- mean: total divided by samples
- sigma: from the samples, a distribution $N(\mu, \sigma)$ is obtained
outliers: mismatch samples above $\mu + \sigma$ , for potential inspection
newcomers: large voting weights found in the ledger but not hardcoded, for potential inspection

--config key=value¶

Valid for both nano_node and nano_wallet processes
Pass node configuration values. This takes precedence over any values in the configuration file. This option can be repeated multiple times.

--confirmation_height_clear¶

It requires the argument --account and sets the confirmation heights of the specified account to 0. It may also be passed the value all to reset all the accounts. Do not use while the node is running.

--daemon¶

Start node daemon. Network and path will be output, similar to:

./nano_node --daemon --network test
Network: test, version: 24.0
Path: /home/USER/NanoTest

--data_path=`<path>`¶

Use the supplied <path> as the data directory.

--diagnostics¶

Run internal diagnostics and validate existing config file (or create default config file if it doesn't exist)

--final_vote_clear¶

Either specify a single --root to clear or --all to clear all final votes (not recommended)

--generate_config node|rpc¶

Write configuration to stdout, populated with commented-out defaults suitable for this system. Pass the configuration type, node or rpc. If --use_defaults is passed, the generated config will not have values commented-out. This is not recommended except for testing and debugging.

The output can be piped to a file, using the locations defined in configuration.

--help¶

Print out options

--initialize¶

Initializes the data folder, if it is not already initialized. This command is meant to be run when the data folder is empty, to populate it with the ledger containing only the genesis block.

--key_create¶

Generates a adhoc random keypair and prints it to stdout

--key_expand --key=`<key>`¶

Derive public key and account number from <key>

--migrate_database_lmdb_to_rocksdb¶

Deletes existing rocksdb subfolder if it exists and migrates the ledger from LMDB to RocksDB. Does not delete the data.ldb file afterwards. NOTE: config files must still be updated to enable RocksDB after database is migrated. You must also stop the node using the stop RPC.

--network¶

Allows selection of a different network at runtime. Values live, beta and test supported.

--online_weight_clear¶

Clear record history for long term online weight trending

--peer_clear¶

Clear cached peers

--rebuild_database¶

Rebuild LMDB database with --vacuum for best compaction. Requires approximately data.ldb size * 2 free space on disk.

--rpcconfig key=value¶

Valid for both nano_node and nano_wallet processes
Pass RPC configuration values. This takes precedence over any values in the configuration file. This option can be repeated multiple times.

--snapshot¶

Compact database and create snapshot, functions similar to vacuum but does not replace the existing database. Optionals : --unchecked_clear, --clear_send_ids, --online_weight_clear, --peer_clear, --confirmation_height_clear .

--unchecked_clear¶

Clear unchecked blocks

--vacuum¶

Compact database. If data_path is missing, the database in data directory is compacted. Optionals : --unchecked_clear, --clear_send_ids, --online_weight_clear, --peer_clear, --confirmation_height_clear , --rebuild_database . Requires approximately data.ldb size * 2 free space on disk.

--validate_blocks¶

Validate blocks in the ledger, includes checks for confirmation height. Optional --threads for multithreaded validation . Multithreaded validation can limit other host operations with high I/O & CPU usage.

--version¶

Prints out version

--vote_dump¶

Dump most recent votes from representatives

--wallet_add_adhoc --wallet=`<wallet>` --key=`<key>`¶

Insert <key> in to <wallet>

--wallet_create --seed=`<seed>` --password=`<password>`¶

Creates a new wallet with optional <seed> and optional <password>, and prints the ID. Note the legacy --key option can still be used and will function the same as --seed. Use --wallet-list to retrieve the wallet ID in the future.

--wallet_change_seed --wallet=`<wallet>` --seed=`<seed>`¶

Changes seed for <wallet> to <seed>. Note the legacy --key option can still be used and will function the same as --seed.

--wallet_decrypt_unsafe --wallet=`<wallet>` --password=`<password>`¶

Decrypts <wallet> using <password>

Danger

USE WITH CAUTION: THIS WILL PRINT YOUR PRIVATE KEY AND SEED TO STDOUT

If you didn't set password yet, use --wallet_decrypt_unsafe --wallet=<wallet>

--wallet_destroy --wallet=`<wallet>`¶

Destroys <wallet> and all keys it contains

--wallet_import --file=`<filepath>` --wallet=`<wallet>` --password=`<password>`¶

Imports keys in <filepath> using <password> in to <wallet>. If the provided wallet id does not exist and --force is included, a new wallet will be created with the provided wallet id value, and the json file will be imported as is with existing seed and password (instead of a set of private keys without a change of seed).

--wallet_list¶

Dumps wallet IDs and public keys

--wallet_remove --wallet=`<wallet>` --account=`<account>`¶

Remove <account> from <wallet>

--wallet_representative_get --wallet=`<wallet>`¶

Prints default representative for <wallet>

--wallet_representative_set --wallet=`<wallet>` --account=`<account>`¶

Set <account> as default representative for <wallet>

Launch options¶

When initially starting the nano_node or nano_wallet as a service the following launch options are available.

Intended for developer use

These options are only for developer use so please understand the impacts before use.

--allow_bootstrap_peers_duplicates¶

Allow multiple connections to the same peer in bootstrap attempts

--block_processor_batch_size¶

Increase block processor transaction batch write size, default 0 (limited by config block_processor_batch_max_time), 256k for fast_bootstrap

--block_processor_full_size¶

Increase block processor allowed blocks queue size before dropping live network packets and holding bootstrap download, default 65536, 1 million for fast_bootstrap

--block_processor_verification_size¶

Increase batch signature verification size in block processor, default 0 (limited by config signature_checker_threads), unlimited for fast_bootstrap

--disable_add_initial_peers¶

Disables the add initial peers function called on startup which reads the peers table and contacts all the peers listed in it

--disable_backup¶

Turn off automatic wallet backup process

--disable_block_processor_unchecked_deletion¶

Disable deletion of unchecked blocks after processing.

--disable_bootstrap_listener¶

Turn off listener on the bootstrap network so incoming TCP (bootstrap) connections are rejected. Note: this does not impact TCP traffic for the live network.

--disable_lazy_bootstrap¶

Turn off use of lazy bootstrap

--disable_legacy_bootstrap¶

Turn off use of legacy bootstrap

--disable_ongoing_bootstrap¶

Turn off the ability for ongoing bootstraps to occur

--disable_providing_telemetry_metrics¶

Do not provide any telemetry data to nodes requesting it. Responses are still made to requests, but they will have an empty payload.

--disable_rep_crawler¶

Turn off the rep crawler process

--disable_request_loop¶

Turn off the request loop

--disable_tcp_realtime¶

Turn off use of TCP live network (TCP for bootstrap will remain available)

--disable_unchecked_cleanup¶

Prevent periodic cleaning of unchecked table

--disable_unchecked_drop¶

Prevent drop of all unchecked entries at node/wallet start

--disable_wallet_bootstrap¶

Turn off use of wallet-based bootstrap

--enable_udp¶

Turn on use of the UDP live network.

--fast_bootstrap¶

Increase bootstrap processor limits to allow more blocks before hitting full state and verify/write more per database call. Also disable deletion of processed unchecked blocks.

--inactive_votes_cache_size¶

Increase cached votes without active elections size, default 16384

--vote_processor_capacity¶

Vote processor queue size before dropping votes, default 144k

Debug commands¶

--debug_account_count¶

Display the number of accounts

--debug_account¶

Display the total counts of each version for all accounts (including unpocketed)

--debug_block_count¶

Display the number of blocks

--debug_block_dump¶

Print ledger blocks - use with caution due to the potentially large amount of data this can output

--debug_bootstrap_generate¶

Generate bootstrap sequence of blocks

--debug_cemented_block_count¶

Display the number of cemented blocks (blocks which are under the confirmation height of their accounts)

--debug_dump_frontier_unchecked_dependents¶

Dump frontiers which have matching unchecked keys

--debug_dump_online_weight¶

List online weights table and current online_weights value

--debug_dump_representatives¶

List representatives and weights

--debug_generate_crash_report¶

After a node crash on linux, this command reads the dump files generated from that crash and produces a "nano_node_crash_report.txt" file. Requires addr2line to be installed on the system. See the troubleshooting guide for more information.

--debug_opencl¶

Profile OpenCL work generation for (optional) --device=<device> on --device=<platform> using --threads=<threads> count. To retrieve available platforms & devices run --diagnostics.

--debug_output_last_backtrace_dump¶

Output the stacktrace stored after a node crash.

Optionals: --difficulty, --multiplier (only the latter is used if both given) to set the work generation threshold.

--debug_profile_bootstrap¶

Profile simulated bootstrap process

--debug_profile_generate¶

Profile work generation

Optionals : --pow_sleep_interval which sets an amount to sleep (in nanoseconds) between batches of POW calculations when using the CPU.
--difficulty, --multiplier (only the latter is used if both given) to set the work generation threshold.

--debug_profile_validate¶

Profile work validation

--debug_profile_kdf¶

Profile kdf function

--debug_profile_sign¶

Profile signature generation

--debug_profile_votes¶

Profile vote verification

--debug_profile_frontiers_confirmation¶

Profile frontiers confirmation speed

--debug_rpc¶

Allows running RPC commands without enabling the RPC server. Not recommended for daily usage.
Example: echo '{"action": "block_count"}' | nano_node --debug_rpc

--debug_stacktrace¶

Prints a stacktrace example, useful to verify that it includes the desired information, such as files, function names and line numbers

--debug_sys_logging¶

On *nix system this checks writing to the system log. On Windows it writes to the event viewer, a registry entry needs to exist for this to work correctly which can be created by running this command for the first time as an administrator

--debug_unconfirmed_frontiers¶

Prints the account, height, frontiers and cemented frontier for all accounts which are not fully confirmed. Sorted by height in descending order

--debug_validate_blocks¶

Alias to --validate_blocks

--debug_verify_profile¶

Profile signature verification

Deprecated commands¶

Launch options¶

--disable_udp¶

This option has been deprecated and will be removed in future versions. It has no effect because it is now the default.

Turn off use of UDP live network

Removed commands¶

No commands have been removed in V24.0

Command Line Interface¶

nano_node commands¶

--account_create --wallet=<wallet>¶

--account_get --key=<key>¶

--account_key --account=<account>¶

--clear_send_ids¶

--compare_rep_weights¶

--config key=value¶

--confirmation_height_clear¶

--daemon¶

--data_path=<path>¶

--diagnostics¶

--final_vote_clear¶

--generate_config node|rpc¶

--help¶

--initialize¶

--key_create¶

--key_expand --key=<key>¶

--migrate_database_lmdb_to_rocksdb¶

--network¶

--online_weight_clear¶

--peer_clear¶

--rebuild_database¶

--rpcconfig key=value¶

--snapshot¶

--unchecked_clear¶

--vacuum¶

--validate_blocks¶

--version¶

--vote_dump¶

--wallet_add_adhoc --wallet=<wallet> --key=<key>¶

--wallet_create --seed=<seed> --password=<password>¶

--wallet_change_seed --wallet=<wallet> --seed=<seed>¶

--wallet_decrypt_unsafe --wallet=<wallet> --password=<password>¶

--wallet_destroy --wallet=<wallet>¶

--wallet_import --file=<filepath> --wallet=<wallet> --password=<password>¶

--wallet_list¶

--wallet_remove --wallet=<wallet> --account=<account>¶

--wallet_representative_get --wallet=<wallet>¶

--wallet_representative_set --wallet=<wallet> --account=<account>¶

Launch options¶

--allow_bootstrap_peers_duplicates¶

--block_processor_batch_size¶

--block_processor_full_size¶

--block_processor_verification_size¶

--disable_add_initial_peers¶

--disable_backup¶

--disable_block_processor_unchecked_deletion¶

--disable_bootstrap_listener¶

--disable_lazy_bootstrap¶

--disable_legacy_bootstrap¶

--disable_ongoing_bootstrap¶

--disable_providing_telemetry_metrics¶

--disable_rep_crawler¶

--disable_request_loop¶

--disable_tcp_realtime¶

--disable_unchecked_cleanup¶

--disable_unchecked_drop¶

--disable_wallet_bootstrap¶

--enable_udp¶

--fast_bootstrap¶

--inactive_votes_cache_size¶

--vote_processor_capacity¶

Debug commands¶

--debug_account_count¶

--debug_account¶

--debug_block_count¶

--debug_block_dump¶

--debug_bootstrap_generate¶

--debug_cemented_block_count¶

--debug_dump_frontier_unchecked_dependents¶

--debug_dump_online_weight¶

--debug_dump_representatives¶

--debug_generate_crash_report¶

--debug_opencl¶

--debug_output_last_backtrace_dump¶

--debug_profile_bootstrap¶

--debug_profile_generate¶

--debug_profile_validate¶

--debug_profile_kdf¶

--account_create --wallet=`<wallet>`¶

--account_get --key=`<key>`¶

--account_key --account=`<account>`¶

--data_path=`<path>`¶

--key_expand --key=`<key>`¶

--wallet_add_adhoc --wallet=`<wallet>` --key=`<key>`¶

--wallet_create --seed=`<seed>` --password=`<password>`¶

--wallet_change_seed --wallet=`<wallet>` --seed=`<seed>`¶

--wallet_decrypt_unsafe --wallet=`<wallet>` --password=`<password>`¶

--wallet_destroy --wallet=`<wallet>`¶

--wallet_import --file=`<filepath>` --wallet=`<wallet>` --password=`<password>`¶

--wallet_remove --wallet=`<wallet>` --account=`<account>`¶

--wallet_representative_get --wallet=`<wallet>`¶

--wallet_representative_set --wallet=`<wallet>` --account=`<account>`¶