RPC Protocol¶
The RPC protocol accepts JSON HTTP POST requests. The following are RPC commands along with the responses that are expected. This page is split into the following sections:
| Section | Purpose |
|---|---|
| Node RPCs | For interacting with the node and ledger. |
| Wallet RPCs | For interacting with the built-in, QT-based node wallet. NOTE: This wallet is only recommended for development and testing. |
| Unit Conversion RPCs | For converting different units to and from raw. |
| Deprecated RPCs | No longer recommended for use. |
Node RPCs¶
Unconfirmed blocks returned
Unless otherwise specified, RPC calls can return unconfirmed blocks and related details. In the most important cases where balances or similar details may include unconfirmed amounts, additional warnings have been included. Refer to Block confirmation procedures for details.
account_balance¶
Returns how many RAW is owned and how many have not yet been received by account
The term pending was deprecated in favor of receivable. For compatibility reasons both terms are still available for many calls and in responses. More details here.
Request:
{
"action": "account_balance",
"account": "nano_3e3j5tkog48pnny9dmfzj1r16pg8t1e76dz5tmac6iq689wyjfpi00000000"
}
Response:
{
"balance": "10000",
"pending": "10000",
"receivable": "10000"
}
Optional "include_only_confirmed"
Boolean, true by default. Results in balance only including blocks on this account that have already been confirmed and receivable only including incoming send blocks that have already been confirmed on the sending account.
account_block_count¶
Get number of blocks for a specific account
Request:
{
"action": "account_block_count",
"account": "nano_3t6k35gi95xu6tergt6p69ck76ogmitsa8mnijtpxm9fkcm736xtoncuohr3"
}
Response:
{
"block_count" : "19"
}
account_get¶
Get account number for the public key
Request:
{
"action": "account_get",
"key": "3068BB1CA04525BB0E416C485FE6A67FD52540227D267CC8B6E8DA958A7FA039"
}
Response:
{
"account" : "nano_1e5aqegc1jb7qe964u4adzmcezyo6o146zb8hm6dft8tkp79za3sxwjym5rx"
}
account_history¶
Reports send/receive information for an account. Returns only send & receive blocks by default (unless raw is set to true - see optional parameters below): change, state change & state epoch blocks are skipped, open & state open blocks will appear as receive, state receive/send blocks will appear as receive/send entries. Response will start with the latest block for the account (the frontier), and will list all blocks back to the open block of this account when "count" is set to "-1". Note: "local_timestamp" "height" field and "confirmed" returned
Includes unconfirmed blocks
This call may return results that include unconfirmed blocks, so it should not be used in any processes or integrations requiring only details from blocks confirmed by the network.
Request:
{
"action": "account_history",
"account": "nano_1ipx847tk8o46pwxt5qjdbncjqcbwcc1rrmqnkztrfjy5k7z4imsrata9est",
"count": "1"
}
Response:
{
"account": "nano_1ipx847tk8o46pwxt5qjdbncjqcbwcc1rrmqnkztrfjy5k7z4imsrata9est",
"history": [
{
"type": "send",
"account": "nano_38ztgpejb7yrm7rr586nenkn597s3a1sqiy3m3uyqjicht7kzuhnihdk6zpz",
"amount": "80000000000000000000000000000000000",
"local_timestamp": "1551532723",
"height": "60",
"hash": "80392607E85E73CC3E94B4126F24488EBDFEB174944B890C97E8F36D89591DC5",
"confirmed": "true"
}
],
"previous": "8D3AB98B301224253750D448B4BD997132400CEDD0A8432F775724F2D9821C72"
}
If the count limit results in stopping before the end of the account chain, then the response will also contain a previous field (outside of the history field) which contains the block hash that would be next to process if count was larger.
Optional parameters:
raw(bool): if set totrueinstead of the defaultfalse, instead of outputting a simplified send or receive explanation of blocks (intended for wallets), output all parameters of the block itself as seen in block_create or other APIs returning blocks. It still includes the "account" and "amount" properties you'd see without this option. State/universal blocks in the raw history will also have asubtypefield indicating their equivalent "old" block. Unfortunately, the "account" parameter for open blocks is the account of the source block, not the account of the open block, to preserve similarity with the non-raw history.head(64 hexadecimal digits string, 256 bit): instead of using the latest block for a specified account, use this block as the head of the account instead. Useful for pagination.offset(decimal integer): skips a number of blocks starting fromhead(if given). Not often used.reverse(bool): if set totrueinstead of the defaultfalse, the response starts fromhead(if given, otherwise the first block of the account), and lists blocks up to the frontier (limited by "count"). Note: the fieldpreviousin the response changes tonext.account_filter(array of public addresses): results will be filtered to only show sends/receives connected to the provided account(s).
account_info¶
Returns frontier, open block, change representative block, balance, last modified timestamp from local database & block count for account. Only works for accounts that have received their first transaction and have an entry on the ledger, will return "Account not found" otherwise. To open an account, use receive.
Unconfirmed information
This call returns information that may be based on unconfirmed blocks. These details should not be relied on for any process or integration that requires confirmed blocks.
The balance is obtained from the frontier, which may be unconfirmed. As long as you follow the guidelines, you can rely on the balance for the purposes of creating transactions for this account. If the frontier is never confirmed, then the blocks that proceed it will also never be confirmed.
If you need only details for confirmed blocks, use the include_confirmed option below and referenced the confirmed_* fields added in to the response.
Request:
{
"action": "account_info",
"account": "nano_3t6k35gi95xu6tergt6p69ck76ogmitsa8mnijtpxm9fkcm736xtoncuohr3"
}
Response:
{
"frontier": "FF84533A571D953A596EA401FD41743AC85D04F406E76FDE4408EAED50B473C5",
"open_block": "991CF190094C00F0B68E2E5F75F6BEE95A2E0BD93CEAA4A6734DB9F19B728948",
"representative_block": "991CF190094C00F0B68E2E5F75F6BEE95A2E0BD93CEAA4A6734DB9F19B728948",
"balance": "235580100176034320859259343606608761791",
"modified_timestamp": "1501793775",
"block_count": "33",
"account_version": "1",
"confirmation_height" : "28",
"confirmation_height_frontier" : "34C70FCA0952E29ADC7BEE6F20381466AE42BD1CFBA4B7DFFE8BD69DF95449EB"
}
Optional "include_confirmed"
Boolean, false by default. Adds new return fields with prefix of confirmed_ for consistency:
confirmed_balance: balance for only blocks on this account that have already been confirmedconfirmed_height: matchesconfirmation_heightvalueconfirmed_frontier: matchesconfirmation_height_frontiervalue- If
representativeoption alsotrue,confirmed_representativeincluded: representative account from the confirmed frontier block - If
receivableoption alsotrue,confirmed_receivableincluded: balance of all receivable amounts where the matching incoming send blocks have been confirmed on their account
The term pending was deprecated in favor of receivable. For compatibility reasons both terms are still available for many calls and in responses. More details here.
Request:
{
"action": "account_info",
"account": "nano_1gyeqc6u5j3oaxbe5qy1hyz3q745a318kh8h9ocnpan7fuxnq85cxqboapu5",
"representative": "true",
"weight": "true",
"receivable": "true",
"include_confirmed": "true"
}
Response:
{
"frontier": "80A6745762493FA21A22718ABFA4F635656A707B48B3324198AC7F3938DE6D4F",
"open_block": "0E3F07F7F2B8AEDEA4A984E29BFE1E3933BA473DD3E27C662EC041F6EA3917A0",
"representative_block": "80A6745762493FA21A22718ABFA4F635656A707B48B3324198AC7F3938DE6D4F",
"balance": "11999999999999999918751838129509869131",
"confirmed_balance": "11999999999999999918751838129509869131",
"modified_timestamp": "1606934662",
"block_count": "22966",
"account_version": "1",
"confirmed_height": "22966",
"confirmed_frontier": "80A6745762493FA21A22718ABFA4F635656A707B48B3324198AC7F3938DE6D4F",
"representative": "nano_1gyeqc6u5j3oaxbe5qy1hyz3q745a318kh8h9ocnpan7fuxnq85cxqboapu5",
"confirmed_representative": "nano_1gyeqc6u5j3oaxbe5qy1hyz3q745a318kh8h9ocnpan7fuxnq85cxqboapu5",
"weight": "11999999999999999918751838129509869131",
"pending": "0",
"receivable": "0",
"confirmed_pending": "0",
"confirmed_receivable": "0"
}
Optional "representative", "weight", "receivable" Booleans, false by default. Additionally returns representative, voting weight, pending/receivable balance for account
Request:
{
"action": "account_info",
"account": "nano_3t6k35gi95xu6tergt6p69ck76ogmitsa8mnijtpxm9fkcm736xtoncuohr3",
"representative": "true",
"weight": "true",
"receivable": "true"
}
Response:
{
"frontier": "FF84533A571D953A596EA401FD41743AC85D04F406E76FDE4408EAED50B473C5",
"open_block": "991CF190094C00F0B68E2E5F75F6BEE95A2E0BD93CEAA4A6734DB9F19B728948",
"representative_block": "991CF190094C00F0B68E2E5F75F6BEE95A2E0BD93CEAA4A6734DB9F19B728948",
"balance": "235580100176034320859259343606608761791",
"modified_timestamp": "1501793775",
"block_count": "33",
"account_version": "1",
"confirmation_height" : "28",
"confirmation_height_frontier" : "34C70FCA0952E29ADC7BEE6F20381466AE42BD1CFBA4B7DFFE8BD69DF95449EB",
"representative": "nano_3t6k35gi95xu6tergt6p69ck76ogmitsa8mnijtpxm9fkcm736xtoncuohr3",
"weight": "1105577030935649664609129644855132177",
"pending": "2309370929000000000000000000000000",
"receivable": "2309370929000000000000000000000000"
}
account_key¶
Get the public key for account
Request:
{
"action": "account_key",
"account" : "nano_1e5aqegc1jb7qe964u4adzmcezyo6o146zb8hm6dft8tkp79za3sxwjym5rx"
}
{
"key": "3068BB1CA04525BB0E416C485FE6A67FD52540227D267CC8B6E8DA958A7FA039"
}
account_representative¶
Returns the representative for account
Request:
{
"action": "account_representative",
"account": "nano_39a73oy5ungrhxy5z5oao1xso4zo7dmgpjd4u74xcrx3r1w6rtazuouw6qfi"
}
{
"representative" : "nano_16u1uufyoig8777y6r8iqjtrw8sg8maqrm36zzcm95jmbd9i9aj5i8abr8u5"
}
account_weight¶
Returns the voting weight for account
Request:
{
"action": "account_weight",
"account": "nano_3e3j5tkog48pnny9dmfzj1r16pg8t1e76dz5tmac6iq689wyjfpi00000000"
}
{
"weight": "10000"
}
accounts_balances¶
Returns how many RAW is owned and how many have not yet been received by accounts list
Unconfirmed information
This call returns information that may be based on unconfirmed blocks. These details should not be relied on for any process or integration that requires confirmed blocks.
The receivable balances are calculated from potentially unconfirmed blocks. Account balances are obtained from their frontiers. An atomic account_info RPC call is recommended for the purposes of creating transactions.
The term pending was deprecated in favor of receivable. For compatibility reasons both terms are still available for many calls and in responses. More details here.
Request:
{
"action": "accounts_balances",
"accounts": ["nano_3t6k35gi95xu6tergt6p69ck76ogmitsa8mnijtpxm9fkcm736xtoncuohr3", "nano_3i1aq1cchnmbn9x5rsbap8b15akfh7wj7pwskuzi7ahz8oq6cobd99d4r3b7"]
}
{
"balances" : {
"nano_3t6k35gi95xu6tergt6p69ck76ogmitsa8mnijtpxm9fkcm736xtoncuohr3": {
"balance": "325586539664609129644855132177",
"pending": "2309372032769300000000000000000000",
"receivable": "2309372032769300000000000000000000"
},
"nano_3i1aq1cchnmbn9x5rsbap8b15akfh7wj7pwskuzi7ahz8oq6cobd99d4r3b7":
{
"balance": "10000000",
"pending": "0",
"receivable": "0"
}
}
}
accounts_frontiers¶
Returns a list of pairs of account and block hash representing the head block for accounts list
Includes unconfirmed blocks
This call may return results that include unconfirmed blocks, so it should not be used in any processes or integrations requiring only details from blocks confirmed by the network.
Request:
{
"action": "accounts_frontiers",
"accounts": ["nano_3t6k35gi95xu6tergt6p69ck76ogmitsa8mnijtpxm9fkcm736xtoncuohr3", "nano_3i1aq1cchnmbn9x5rsbap8b15akfh7wj7pwskuzi7ahz8oq6cobd99d4r3b7"]
}
{
"frontiers" : {
"nano_3t6k35gi95xu6tergt6p69ck76ogmitsa8mnijtpxm9fkcm736xtoncuohr3": "791AF413173EEE674A6FCF633B5DFC0F3C33F397F0DA08E987D9E0741D40D81A",
"nano_3i1aq1cchnmbn9x5rsbap8b15akfh7wj7pwskuzi7ahz8oq6cobd99d4r3b7": "6A32397F4E95AF025DE29D9BF1ACE864D5404362258E06489FABDBA9DCCC046F"
}
}
Error handling
With , accounts_frontiers response errors are also returned per entry.
{
"frontiers": {
"nano_3wfddg7a1paogrcwi3yhwnaerboukbr7rs3z3ino5toyq3yyhimo6f6egij6": "75BD65296241EB871918EBE3E99E9A191970A2724B3214B27F8AB205FF4FC30A",
"nano_36uccgpjzhjsdbj44wm1y5hyz8gefx3wjpp1jircxt84nopxkxti5bzq1rnz": "error: Bad account number",
"nano_1hrts7hcoozxccnffoq9hqhngnn9jz783usapejm57ejtqcyz9dpso1bibuy": "error: Account not found"
}
}
accounts_pending¶
Deprecated in V24.0+. Replaced by accounts_receivable
accounts_receivable¶
since V24.0, use accounts_pending
Returns a list of confirmed block hashes which have not yet been received by these accounts
Request:
{
"action": "accounts_receivable",
"accounts": ["nano_1111111111111111111111111111111111111111111111111117353trpda", "nano_3t6k35gi95xu6tergt6p69ck76ogmitsa8mnijtpxm9fkcm736xtoncuohr3"],
"count": "1"
}
{
"blocks" : {
"nano_1111111111111111111111111111111111111111111111111117353trpda": ["142A538F36833D1CC78B94E11C766F75818F8B940771335C6C1B8AB880C5BB1D"],
"nano_3t6k35gi95xu6tergt6p69ck76ogmitsa8mnijtpxm9fkcm736xtoncuohr3": ["4C1FEEF0BEA7F50BE35489A1233FE002B212DEA554B55B1B470D78BD8F210C74"]
}
}
Number (128 bit, decimal). Returns a list of receivable block hashes with amount more or equal to threshold
Request:
{
"action": "accounts_receivable",
"accounts": ["nano_1111111111111111111111111111111111111111111111111117353trpda", "nano_3t6k35gi95xu6tergt6p69ck76ogmitsa8mnijtpxm9fkcm736xtoncuohr3"],
"count": "1",
"threshold": "1000000000000000000000000"
}
{
"blocks" : {
"nano_1111111111111111111111111111111111111111111111111117353trpda": {
"142A538F36833D1CC78B94E11C766F75818F8B940771335C6C1B8AB880C5BB1D": "6000000000000000000000000000000"
},
"nano_3t6k35gi95xu6tergt6p69ck76ogmitsa8mnijtpxm9fkcm736xtoncuohr3": {
"4C1FEEF0BEA7F50BE35489A1233FE002B212DEA554B55B1B470D78BD8F210C74": "106370018000000000000000000000000"
}
}
}
Boolean, false by default. Returns a list of receivable block hashes with amount and source accounts
Request:
{
"action": "accounts_receivable",
"accounts": ["nano_1111111111111111111111111111111111111111111111111117353trpda", "nano_3t6k35gi95xu6tergt6p69ck76ogmitsa8mnijtpxm9fkcm736xtoncuohr3"],
"count": "1",
"source": "true"
}
{
"blocks" : {
"nano_1111111111111111111111111111111111111111111111111117353trpda": {
"142A538F36833D1CC78B94E11C766F75818F8B940771335C6C1B8AB880C5BB1D": {
"amount": "6000000000000000000000000000000",
"source": "nano_3dcfozsmekr1tr9skf1oa5wbgmxt81qepfdnt7zicq5x3hk65fg4fqj58mbr"
}
},
"nano_3t6k35gi95xu6tergt6p69ck76ogmitsa8mnijtpxm9fkcm736xtoncuohr3": {
"4C1FEEF0BEA7F50BE35489A1233FE002B212DEA554B55B1B470D78BD8F210C74": {
"amount": "106370018000000000000000000000000",
"source": "nano_13ezf4od79h1tgj9aiu4djzcmmguendtjfuhwfukhuucboua8cpoihmh8byo"
}
}
}
}
Boolean, false by default. Include active (not confirmed) blocks
Request:
{
"action": "accounts_receivable",
"accounts": ["nano_1111111111111111111111111111111111111111111111111117353trpda", "nano_3t6k35gi95xu6tergt6p69ck76ogmitsa8mnijtpxm9fkcm736xtoncuohr3"],
"count": "1",
"include_active": "true"
}
Optional "sorting"
Boolean, false by default. Additionally sorts each account's blocks by their amounts in descending order.
Optional "include_only_confirmed"
Boolean, true by default. Only returns confirmed blocks but with the caveat that their confirmation height might not be up-to-date yet. If false, unconfirmed blocks will also be returned.
accounts_representatives¶
Returns the representatives for given accounts
Request:
{
"action": "accounts_representatives",
"accounts": ["nano_16u1uufyoig8777y6r8iqjtrw8sg8maqrm36zzcm95jmbd9i9aj5i8abr8u5","nano_3t6k35gi95xu6tergt6p69ck76ogmitsa8mnijtpxm9fkcm736xtoncuohr3"]
}
{
"representatives" : {
"nano_16u1uufyoig8777y6r8iqjtrw8sg8maqrm36zzcm95jmbd9i9aj5i8abr8u5": "nano_3hd4ezdgsp15iemx7h81in7xz5tpxi43b6b41zn3qmwiuypankocw3awes5k",
"nano_3t6k35gi95xu6tergt6p69ck76ogmitsa8mnijtpxm9fkcm736xtoncuohr3": "nano_3t6k35gi95xu6tergt6p69ck76ogmitsa8mnijtpxm9fkcm736xtoncuohr3"
}
}
Error handling
With , accounts_representatives response errors are also returned per entry.
{
"representatives": {
"nano_3wfddg7a1paogrcwi3yhwnaerboukbr7rs3z3ino5toyq3yyhimo6f6egij6": "nano_3wfddg7a1paogrcwi3yhwnaerboukbr7rs3z3ino5toyq3yyhimo6f6egij6",
"nano_36uccgpjzhjsdbj44wm1y5hyz8gefx3wjpp1jircxt84nopxkxti5bzq1rnz": "error: Bad account number",
"nano_1hrts7hcoozxccnffoq9hqhngnn9jz783usapejm57ejtqcyz9dpso1bibuy": "error: Account not found"
}
}
available_supply¶
Returns how many raw are in the public supply
Request:
{
"action": "available_supply"
}
{
"available": "133248061996216572282917317807824970865"
}
block_account¶
Returns the account containing block
Request:
{
"action": "block_account",
"hash": "023B94B7D27B311666C8636954FE17F1FD2EAA97A8BAC27DE5084FBBD5C6B02C"
}
{
"account": "nano_3t6k35gi95xu6tergt6p69ck76ogmitsa8mnijtpxm9fkcm736xtoncuohr3"
}
block_confirm¶
Request confirmation for block from known online representative nodes. Check results with confirmation history.
Request:
{
"action": "block_confirm",
"hash": "000D1BAEC8EC208142C99059B393051BAC8380F9B5A2E6B2489A277D81789F3F"
}
{
"started": "1"
}
NOTE: Unless there was an error encountered during the command, the response will always return "started": "1". This response does not indicate the block was successfully confirmed, only that an error did not occur. This response happens even if the block has already been confirmed previously and notifications will be triggered for this block (via HTTP callbacks or WebSockets) in all cases. This behavior may change in a future release.
block_count¶
Reports the number of blocks in the ledger and unchecked synchronizing blocks
Request:
{
"action": "block_count"
}
{
"count": "1000",
"unchecked": "10",
"cemented": "25"
}
Optional "include_cemented"
Default "true". If "true", "cemented" in the response will contain the number of cemented blocks. (In V19.0 default was "false")
Dangerous RPC calls controlled by enable_control
This RPC command/option requires enable_control to be enabled within the RPC config file. Enabling this means that anyone with access to the RPC port could potentially access wallet funds, stop the node from running and take other dangerous actions. Use caution when enabling this option, especially with external RPC access available. For more details see the Node Security page.
block_create¶
enable_control required
Creates a json representations of new block based on input data & signed with private key or account in wallet. Use for offline signing. Using the optional json_block is recommended .
Dangerous RPC calls controlled by enable_control
This RPC command/option requires enable_control to be enabled within the RPC config file. Enabling this means that anyone with access to the RPC port could potentially access wallet funds, stop the node from running and take other dangerous actions. Use caution when enabling this option, especially with external RPC access available. For more details see the Node Security page.
Request sample for state block:
{
"action": "block_create",
"json_block": "true",
"type": "state",
"balance": "1000000000000000000000",
"key": "0000000000000000000000000000000000000000000000000000000000000002",
"representative": "nano_1hza3f7wiiqa7ig3jczyxj5yo86yegcmqk3criaz838j91sxcckpfhbhhra1",
"link": "19D3D919475DEED4696B5D13018151D1AF88B2BD3BCFF048B45031C1F36D1858",
"previous": "F47B23107E5F34B2CE06F562B5C435DF72A533251CB414C51B2B62A8F63A00E4"
}
balance: final balance for account after block creation, formatted in 'raw' units using a decimal integer. If balance is less than previous, block is considered as send subtype!wallet(optional): The wallet ID that the account the block is being created for is in.account(optional): The account the block is being created for.key(optional): Instead of using "wallet" & "account" parameters, you can directly pass in a private key.source(optional): The block hash of the source of funds for this receive block (the send block that this receive block will pocket).destination(optional): The account that the sent funds should be accessible to.link(optional): Instead of using "source" and "destination" parameters, you can directly pass "link". If the block is sending funds, set link to the public key of the destination account. If it is receiving funds, set link to the hash of the block to receive. If the block has no balance change but is updating representative only, set link to 0. See Block format section for more informationrepresentative: The account that block account will use as its representative.previous: The block hash of the previous block on this account's block chain ("0" for first block).
Warning: It is critical that balance is the balance of the account after created block!
Optional "json_block"
Default "false". If "true", "block" in the response will contain a JSON subtree instead of a JSON string.
Optional "work"
Work value (16 hexadecimal digits string, 64 bit). Uses work value for block from external source
Optional "version"
Work version string. Currently "work_1" is the default and only valid option. Only used if optional work is not given.
Optional "difficulty"
Difficulty value (16 hexadecimal digits string, 64 bit). Uses difficulty value to generate work. Only used if optional work is not given.
If difficulty and work values are both not given, RPC processor tries to calculate difficulty for work generation based on ledger data: epoch from previous block or from link for receive subtype; block subtype from previous block balance.
Examples
Response sample for above request:
{
"hash": "FF0144381CFF0B2C079A115E7ADA7E96F43FD219446E7524C48D1CC9900C4F17",
"difficulty": "ffffffe1278b3dc6",
"block": {
"type": "state",
"account": "nano_3qgmh14nwztqw4wmcdzy4xpqeejey68chx6nciczwn9abji7ihhum9qtpmdr",
"previous": "F47B23107E5F34B2CE06F562B5C435DF72A533251CB414C51B2B62A8F63A00E4",
"representative": "nano_1hza3f7wiiqa7ig3jczyxj5yo86yegcmqk3criaz838j91sxcckpfhbhhra1",
"balance": "1000000000000000000000",
"link": "19D3D919475DEED4696B5D13018151D1AF88B2BD3BCFF048B45031C1F36D1858",
"link_as_account": "nano_18gmu6engqhgtjnppqam181o5nfhj4sdtgyhy36dan3jr9spt84rzwmktafc",
"signature": "3BFBA64A775550E6D49DF1EB8EEC2136DCD74F090E2ED658FBD9E80F17CB1C9F9F7BDE2B93D95558EC2F277FFF15FD11E6E2162A1714731B743D1E941FA4560A",
"work": "cab7404f0b5449d0"
}
}
block_hash¶
Returning block hash for given block content. Using the optional json_block is recommended .
Request:
{
"action": "block_hash",
"json_block": "true",
"block": {
"type": "state",
"account": "nano_3qgmh14nwztqw4wmcdzy4xpqeejey68chx6nciczwn9abji7ihhum9qtpmdr",
"previous": "F47B23107E5F34B2CE06F562B5C435DF72A533251CB414C51B2B62A8F63A00E4",
"representative": "nano_1hza3f7wiiqa7ig3jczyxj5yo86yegcmqk3criaz838j91sxcckpfhbhhra1",
"balance": "1000000000000000000000",
"link": "19D3D919475DEED4696B5D13018151D1AF88B2BD3BCFF048B45031C1F36D1858",
"link_as_account": "nano_18gmu6engqhgtjnppqam181o5nfhj4sdtgyhy36dan3jr9spt84rzwmktafc",
"signature": "3BFBA64A775550E6D49DF1EB8EEC2136DCD74F090E2ED658FBD9E80F17CB1C9F9F7BDE2B93D95558EC2F277FFF15FD11E6E2162A1714731B743D1E941FA4560A",
"work": "cab7404f0b5449d0"
}
}
{
"hash": "FF0144381CFF0B2C079A115E7ADA7E96F43FD219446E7524C48D1CC9900C4F17"
}
Optional "json_block"
Default "false". If "true", "block" must contain a JSON subtree instead of a JSON string.
block_info¶
Retrieves a json representation of the block in contents along with:
block_account, transactionamount, blockbalance, blockheightin account chain, block local modificationtimestamp- Whether block was
confirmed,subtype(for state blocks) ofsend,receive,changeorepoch successorreturned
Using the optional json_block is recommended .
Request:
{
"action": "block_info",
"json_block": "true",
"hash": "87434F8041869A01C8F6F263B87972D7BA443A72E0A97D7A3FD0CCC2358FD6F9"
}
{
"block_account": "nano_1ipx847tk8o46pwxt5qjdbncjqcbwcc1rrmqnkztrfjy5k7z4imsrata9est",
"amount": "30000000000000000000000000000000000",
"balance": "5606157000000000000000000000000000000",
"height": "58",
"local_timestamp": "0",
"successor": "8D3AB98B301224253750D448B4BD997132400CEDD0A8432F775724F2D9821C72",
"confirmed": "true",
"contents": {
"type": "state",
"account": "nano_1ipx847tk8o46pwxt5qjdbncjqcbwcc1rrmqnkztrfjy5k7z4imsrata9est",
"previous": "CE898C131AAEE25E05362F247760F8A3ACF34A9796A5AE0D9204E86B0637965E",
"representative": "nano_1stofnrxuz3cai7ze75o174bpm7scwj9jn3nxsn8ntzg784jf1gzn1jjdkou",
"balance": "5606157000000000000000000000000000000",
"link": "5D1AA8A45F8736519D707FCB375976A7F9AF795091021D7E9C7548D6F45DD8D5",
"link_as_account": "nano_1qato4k7z3spc8gq1zyd8xeqfbzsoxwo36a45ozbrxcatut7up8ohyardu1z",
"signature": "82D41BC16F313E4B2243D14DFFA2FB04679C540C2095FEE7EAE0F2F26880AD56DD48D87A7CC5DD760C5B2D76EE2C205506AA557BF00B60D8DEE312EC7343A501",
"work": "8a142e07a10996d5"
},
"subtype": "send"
}
Note: The Balance in contents is a uint128. However, it will be a hex-encoded (like 0000000C9F2C9CD04674EDEA40000000 for 1 nano) when the block is a legacy Send Block. If the block is a State-Block, the same Balance will be a numeric-string (like 1000000000000000000000000000000).
Optional "json_block"
Default "false". If "true", "contents" will contain a JSON subtree instead of a JSON string.
blocks¶
Retrieves a json representations of blocks. Using the optional json_block is recommended .
Request:
{
"action": "blocks",
"json_block": "true",
"hashes": ["87434F8041869A01C8F6F263B87972D7BA443A72E0A97D7A3FD0CCC2358FD6F9"]
}
{
"blocks": {
"87434F8041869A01C8F6F263B87972D7BA443A72E0A97D7A3FD0CCC2358FD6F9": {
"type": "state",
"account": "nano_1ipx847tk8o46pwxt5qjdbncjqcbwcc1rrmqnkztrfjy5k7z4imsrata9est",
"previous": "CE898C131AAEE25E05362F247760F8A3ACF34A9796A5AE0D9204E86B0637965E",
"representative": "nano_1stofnrxuz3cai7ze75o174bpm7scwj9jn3nxsn8ntzg784jf1gzn1jjdkou",
"balance": "5606157000000000000000000000000000000",
"link": "5D1AA8A45F8736519D707FCB375976A7F9AF795091021D7E9C7548D6F45DD8D5",
"link_as_account": "nano_1qato4k7z3spc8gq1zyd8xeqfbzsoxwo36a45ozbrxcatut7up8ohyardu1z",
"signature": "82D41BC16F313E4B2243D14DFFA2FB04679C540C2095FEE7EAE0F2F26880AD56DD48D87A7CC5DD760C5B2D76EE2C205506AA557BF00B60D8DEE312EC7343A501",
"work": "8a142e07a10996d5"
}
}
}
Optional "json_block"
Default "false". If "true", "contents" will contain a JSON subtree instead of a JSON string.
blocks_info¶
Retrieves a json representations of blocks in contents along with:
block_account, transactionamount, blockbalance, blockheightin account chain, block local modificationtimestamp- Whether block was
confirmed,subtype(for state blocks) ofsend,receive,changeorepoch successorreturned
Using the optional json_block is recommended .
Request:
{
"action": "blocks_info",
"json_block": "true",
"hashes": ["87434F8041869A01C8F6F263B87972D7BA443A72E0A97D7A3FD0CCC2358FD6F9"]
}
{
"blocks": {
"87434F8041869A01C8F6F263B87972D7BA443A72E0A97D7A3FD0CCC2358FD6F9": {
"block_account": "nano_1ipx847tk8o46pwxt5qjdbncjqcbwcc1rrmqnkztrfjy5k7z4imsrata9est",
"amount": "30000000000000000000000000000000000",
"balance": "5606157000000000000000000000000000000",
"height": "58",
"local_timestamp": "0",
"successor": "8D3AB98B301224253750D448B4BD997132400CEDD0A8432F775724F2D9821C72",
"confirmed": "true",
"contents": {
"type": "state",
"account": "nano_1ipx847tk8o46pwxt5qjdbncjqcbwcc1rrmqnkztrfjy5k7z4imsrata9est",
"previous": "CE898C131AAEE25E05362F247760F8A3ACF34A9796A5AE0D9204E86B0637965E",
"representative": "nano_1stofnrxuz3cai7ze75o174bpm7scwj9jn3nxsn8ntzg784jf1gzn1jjdkou",
"balance": "5606157000000000000000000000000000000",
"link": "5D1AA8A45F8736519D707FCB375976A7F9AF795091021D7E9C7548D6F45DD8D5",
"link_as_account": "nano_1qato4k7z3spc8gq1zyd8xeqfbzsoxwo36a45ozbrxcatut7up8ohyardu1z",
"signature": "82D41BC16F313E4B2243D14DFFA2FB04679C540C2095FEE7EAE0F2F26880AD56DD48D87A7CC5DD760C5B2D76EE2C205506AA557BF00B60D8DEE312EC7343A501",
"work": "8a142e07a10996d5"
},
"subtype": "send"
}
}
}
_pending, source:
Booleans, false by default. Additionally checks if block is pending, returns source account for receive & open blocks (0 for send & change blocks).
The term pending was deprecated in favor of receivable. For compatibility reasons both terms are still available for many calls and in responses. More details here.
Request:
{
"action": "blocks_info",
"hashes": ["E2FB233EF4554077A7BF1AA85851D5BF0B36965D2B0FB504B2BC778AB89917D3"],
"pending": "true",
"source": "true"
}
{
"blocks" : {
"E2FB233EF4554077A7BF1AA85851D5BF0B36965D2B0FB504B2BC778AB89917D3": {
"block_account": "nano_1qato4k7z3spc8gq1zyd8xeqfbzsoxwo36a45ozbrxcatut7up8ohyardu1z",
"amount": "30000000000000000000000000000000000",
"contents": {
...
},
"pending": "0",
"source_account": "nano_1ipx847tk8o46pwxt5qjdbncjqcbwcc1rrmqnkztrfjy5k7z4imsrata9est",
"balance": "40200000001000000000000000000000000"
}
}
}
Boolean, default false. If "true", displays the hash of the send block's corresponding receive (if any). Returns 0 for non-send blocks, and for receivable blocks that do not yet have a corresponding receive.
Request:
{
"action": "blocks_info",
"hashes": ["67D9F9F03566D22926159193BD5BDE549FBE8308807C666BCCD3CEA098FBF49D"],
"receive_hash": "true"
}
Response
{
"blocks": {
"67D9F9F03566D22926159193BD5BDE549FBE8308807C666BCCD3CEA098FBF49D": {
"block_account": "nano_1pnano6m6o1ix3eshr6fj9rryd4ckziyii1mf3ychqno9t3soz638dc9fj9a",
"amount": "1240000000000000000000000000",
"balance": "11017588042701000000000000000000",
"height": "271199",
"local_timestamp": "1674588370",
"successor": "0000000000000000000000000000000000000000000000000000000000000000",
"confirmed": "true",
"contents": {
...
},
"subtype": "send",
"receive_hash": "4DCA5A5E2C732A6899292B9091B7A90CE87E8063954498DF30F469416E6DD6C0"
}
}
}
Optional "json_block"
Default "false". If "true", "contents" will contain a JSON subtree instead of a JSON string.
Optional "include_not_found"
Default "false". If "true", an additional "blocks_not_found" is provided in the response, containing a list of the block hashes that were not found in the local database. Previously to this version an error would be produced if any block was not found.
Request:
{
"action": "blocks_info",
"include_not_found": "true",
"hashes": ["87434F8041869A01C8F6F263B87972D7BA443A72E0A97D7A3FD0CCC2358FD6F9", "0000000000000000000000000000000000000000000000000000000000000001"]
}
Response:
{
"blocks" : {
"87434F8041869A01C8F6F263B87972D7BA443A72E0A97D7A3FD0CCC2358FD6F9": {
"block_account": "nano_1ipx847tk8o46pwxt5qjdbncjqcbwcc1rrmqnkztrfjy5k7z4imsrata9est",
"amount": "30000000000000000000000000000000000",
"balance": "5606157000000000000000000000000000000",
"height": "58",
"local_timestamp": "0",
"confirmed": "false",
"contents": {
...
}
}
},
"blocks_not_found": [
"0000000000000000000000000000000000000000000000000000000000000001"
]
}
bootstrap¶
Initialize bootstrap to specific IP address and port. Not compatible with launch flag --disable_legacy_bootstrap
Request:
{
"action": "bootstrap",
"address": "::ffff:138.201.94.249",
"port": "7075"
}
{
"success": ""
}
bootstrap_any¶
Initialize multi-connection bootstrap to random peers. Not compatible with launch flag --disable_legacy_bootstrap
Request:
{
"action": "bootstrap_any"
}
{
"success": ""
}
Boolean, false by default. Manually force closing of all current bootstraps
Optional "id"
String, empty by default. Set specific ID for new bootstrap attempt for better tracking.
Optional "account"
String, empty by default. Public address for targeting a specific account on bootstrap attempt
bootstrap_lazy¶
Initialize lazy bootstrap with given block hash. Not compatible with launch flag --disable_lazy_bootstrap. Response includes whether new election was started and whether a new lazy key_inserted was successful.
Request:
{
"action": "bootstrap_lazy",
"hash": "FF0144381CFF0B2C079A115E7ADA7E96F43FD219446E7524C48D1CC9900C4F17"
}
{
"started": "1",
"key_inserted": "0"
}
Boolean, false by default. Manually force closing of all current bootstraps
Optional "id"
String, empty by default. Set specific ID for new bootstrap attempt for better tracking.
bootstrap_status¶
Debug purposes only
This call is for internal diagnostics/debug purposes only. Do not rely on this interface being stable and do not use in a production system.
Returning status of current bootstrap attempt
Request:
{
"action": "bootstrap_status"
}
{
"bootstrap_threads": "2",
"running_attempts_count": "2",
"total_attempts_count": "6",
"connections": {
"clients": "31",
"connections": "45",
"idle": "0",
"target_connections": "64",
"pulls": "1158514"
},
"attempts": [
{
"id": "EE778222D6407F94A666B8A9E03D242D",
"mode": "legacy",
"started": "true",
"pulling": "1158544",
"total_blocks": "4311",
"requeued_pulls": "7",
"frontier_pulls": "0",
"frontiers_received": "true",
"frontiers_confirmed": "false",
"frontiers_confirmation_pending": "false",
"frontiers_age": "4294967295",
"last_account": "nano_1111111111111111111111111111111111111111111111111111hifc8npp",
"duration": "133"
},
{
"id": "291D2CC32F44E004896C4215A6CDEDAFEF317F6AC802C244E8F4B4F2456175CB",
"mode": "lazy",
"started": "true",
"pulling": "1",
"total_blocks": "1878",
"requeued_pulls": "4",
"lazy_blocks": "1878",
"lazy_state_backlog": "1",
"lazy_balances": "4",
"lazy_destinations": "0",
"lazy_undefined_links": "0",
"lazy_pulls": "13",
"lazy_keys": "2",
"lazy_key_1": "E6D0B5BD5EBDB3CEC7DBC32EDC3C2DBD5ABA17C54E34485A358BF8948039ED6A",
"duration": "17"
}
]
}
Response V17.0-V20.0
{
"clients": "0",
"pulls": "0",
"pulling": "0",
"connections": "31",
"idle": "31",
"target_connections": "16",
"total_blocks": "13558",
"runs_count": "0",
"requeued_pulls": "31",
"frontiers_received": "true",
"frontiers_confirmed": "false",
"mode": "legacy",
"lazy_blocks": "0",
"lazy_state_backlog": "0",
"lazy_balances": "0",
"lazy_destinations": "0",
"lazy_undefined_links": "0",
"lazy_pulls": "32",
"lazy_keys": "32",
"lazy_key_1": "36897874BDA3028DC8544C106BE1394891F23DDDF84DE100FED450F6FBC8122C",
"duration": "29"
}
chain¶
Returns a consecutive list of block hashes in the account chain starting at block back to count (direction from frontier back to open block, from newer blocks to older). Will list all blocks back to the open block of this chain when count is set to "-1". The requested block hash is included in the answer.
Request:
{
"action": "chain",
"block": "000D1BAEC8EC208142C99059B393051BAC8380F9B5A2E6B2489A277D81789F3F",
"count": "1"
}
{
"blocks": [
"000D1BAEC8EC208142C99059B393051BAC8380F9B5A2E6B2489A277D81789F3F"
]
}
Number, 0 by default. Return the account chain block hashes offset by the specified number of blocks
Optional "reverse"
Boolean, false by default. Returns a list of block hashes in the account chain starting at block up to count (direction from open block up to frontier, from older blocks to newer). Equal to successors
confirmation_active¶
Returns list of active elections qualified roots (excluding stopped & aborted elections); Includes the number of unconfirmed and confirmed active elections. Find info about specific qualified root with confirmation_info
Note
The roots provided are two parts and differ between the first account block and subsequent blocks:
- First account block (open): account public key +
0000000000000000000000000000000000000000000000000000000000000000 - Other blocks: previous hash + previous hash
Request:
{
"action": "confirmation_active"
}
{
"confirmations": [
"8031B600827C5CC05FDC911C28BBAC12A0E096CCB30FA8324F56C123676281B28031B600827C5CC05FDC911C28BBAC12A0E096CCB30FA8324F56C123676281B2"
],
"unconfirmed": "133",
"confirmed": "5"
}
Optional "announcements"
Number, 0 by default. Returns only active elections with equal or higher announcements count. Useful to find long running elections
confirmation_height_currently_processing¶
Debug purposes only
This call is for internal diagnostics/debug purposes only. Do not rely on this interface being stable and do not use in a production system.
Returns the hash of the block which is having the confirmation height set for, error otherwise. When a block is being confirmed, it must confirm all blocks in the chain below and iteratively follow all receive blocks. This can take a long time, so it can be useful to find which block was the original being confirmed.
Request:
{
"action": "confirmation_height_currently_processing"
}
{
"hash": "000D1BAEC8EC208142C99059B393051BAC8380F9B5A2E6B2489A277D81789F3F"
}
confirmation_history¶
Debug purposes only
This call is for internal diagnostics/debug purposes only. Do not rely on this interface being stable and do not use in a production system.
duration, time, confirmation_stats:
Returns hash, tally weight, election duration (in milliseconds), election confirmation timestamp for recent elections winners; the confirmation request count; the number of blocks and voters. Also returns stats: count of elections in history (limited to 2048) & average duration time.
confirmation_history_size can be managed in the configuration file to adjust the number of elections to be kept in history and returned by this call. Due to timings inside the node, the default 2048 limit will return all confirmations up to traffic levels of approximately 56 confirmations/sec. To properly track levels above this, increase this value or use the confirmation subscription through the websocket instead.
Request:
{
"action": "confirmation_history"
}
{
"confirmation_stats": {
"count": "2",
"average": "5000"
},
"confirmations": [
{
"hash": "EA70B32C55C193345D625F766EEA2FCA52D3F2CCE0B3A30838CC543026BB0FEA",
"duration": "4000",
"time": "1544819986",
"tally": "80394786589602980996311817874549318248",
"blocks": "1", // since V21.0
"voters": "37", // since V21.0
"request_count": "2" // since V20.0
},
{
"hash": "F2F8DA6D2CA0A4D78EB043A7A29E12BDE5B4CE7DE1B99A93A5210428EE5B8667",
"duration": "6000",
"time": "1544819988",
"tally": "68921714529890443063672782079965877749",
"blocks": "1", // since V21.0
"voters": "64", // since V21.0
"request_count": "7" // since V20.0
}
]
}
Valid block hash, filters return for only the provided hash. If there is no confirmation available for that hash anymore, the following return can be expected:
{
"confirmation_stats": {
"count": "0"
},
"confirmations": ""
}
If the block is unknown on the node, the following error will be returned:
"error": "Invalid block hash"
confirmation_info¶
Returns info about an unconfirmed active election by root. Including announcements count, last winner (initially local ledger block), total tally of voted representatives, concurrent blocks with tally & block contents for each. Using the optional json_block is recommended.
Note
The roots provided are two parts and differ between the first account block and subsequent blocks:
- First account block (open):
0000000000000000000000000000000000000000000000000000000000000000+ account public key - Other blocks: previous hash + previous hash
Request:
{
"action": "confirmation_info",
"json_block": "true",
"root": "EE125B1B1D85D3C24636B3590E1642D9F21B166C0C6CD99C9C6087A1224A0C44EE125B1B1D85D3C24636B3590E1642D9F21B166C0C6CD99C9C6087A1224A0C44"
}
Response:
{
"announcements": "2",
"voters": "29",
"last_winner": "B94C505029F04BC057A0486ADA8BD07981B4A8736AE6581F2E98C6D18498146F",
"total_tally": "51145880360832646375807054724596663794",
"blocks": {
"B94C505029F04BC057A0486ADA8BD07981B4A8736AE6581F2E98C6D18498146F": {
"tally": "51145880360832646375807054724596663794",
"contents": {
"type": "state",
"account": "nano_3fihmbtuod33s4nrbqfczhk9zy9ddqimwjshzg4c3857es8c9631i5rg6h9p",
"previous": "EE125B1B1D85D3C24636B3590E1642D9F21B166C0C6CD99C9C6087A1224A0C44",
"representative": "nano_3o7uzba8b9e1wqu5ziwpruteyrs3scyqr761x7ke6w1xctohxfh5du75qgaj",
"balance": "218195000000000000000000000000",
"link": "0000000000000000000000000000000000000000000000000000000000000000",
"link_as_account": "nano_1111111111111111111111111111111111111111111111111111hifc8npp",
"signature": "B1BD285235C612C5A141FA61793D7C6C762D3F104A85102DED5FBD6B4514971C4D044ACD3EC8C06A9495D8E83B6941B54F8DABA825ADF799412ED9E2C86D7A0C",
"work": "05bb28cd8acbe71d"
}
}
}
}
Optional "contents"
Boolean, true by default. Disable contents for each block
Optional "json_block"
Default "false". If "true", "contents" will contain a JSON subtree instead of a JSON string.
Optional "representatives"
Boolean, false by default. Returns list of votes representatives & its weights for each block
Request:
{
"action": "confirmation_info",
"json_block": "true",
"root": "EE125B1B1D85D3C24636B3590E1642D9F21B166C0C6CD99C9C6087A1224A0C44EE125B1B1D85D3C24636B3590E1642D9F21B166C0C6CD99C9C6087A1224A0C44",
"representatives": "true"
}
{
"announcements": "5",
"last_winner": "B94C505029F04BC057A0486ADA8BD07981B4A8736AE6581F2E98C6D18498146F",
"total_tally": "51145880360792646375807054724596663794",
"blocks": {
"B94C505029F04BC057A0486ADA8BD07981B4A8736AE6581F2E98C6D18498146F": {
"tally": "51145880360792646375807054724596663794",
"contents": {
"type": "state",
"account": "nano_3fihmbtuod33s4nrbqfczhk9zy9ddqimwjshzg4c3857es8c9631i5rg6h9p",
"previous": "EE125B1B1D85D3C24636B3590E1642D9F21B166C0C6CD99C9C6087A1224A0C44",
"representative": "nano_3o7uzba8b9e1wqu5ziwpruteyrs3scyqr761x7ke6w1xctohxfh5du75qgaj",
"balance": "218195000000000000000000000000",
"link": "0000000000000000000000000000000000000000000000000000000000000000",
"link_as_account": "nano_1111111111111111111111111111111111111111111111111111hifc8npp",
"signature": "B1BD285235C612C5A141FA61793D7C6C762D3F104A85102DED5FBD6B4514971C4D044ACD3EC8C06A9495D8E83B6941B54F8DABA825ADF799412ED9E2C86D7A0C",
"work": "05bb28cd8acbe71d"
},
"representatives": {
"nano_3pczxuorp48td8645bs3m6c3xotxd3idskrenmi65rbrga5zmkemzhwkaznh": "12617828599372664613607727105312358589",
"nano_1stofnrxuz3cai7ze75o174bpm7scwj9jn3nxsn8ntzg784jf1gzn1jjdkou": "5953738757270291536911559258663615240",
...
"nano_3i4n5n6c6xssapbdtkdoutm88c5zjmatc5tc77xyzdkpef8akid9errcpjnx": "0"
}
}
}
}
confirmation_quorum¶
Returns information about node elections settings & observed network state:
quorum_delta: Online weight timesonline_weight_quorum_percentonline_weight_quorum_percent: Percent of online vote weight required for confirmationonline_weight_minimum: When calculating online weight, the node is forced to assume at least this much voting weight is online, thus setting a floor for voting weight to confirm transactions atonline_weight_minimum*quorum_deltaonline_stake_total: Total online weight from gossip vote trafficpeers_stake_total: Total online weight from direct node connectionstrended_stake_total: Median of online weight samples taken every 5 minutes over previous 2 week period
Request:
{
"action": "confirmation_quorum"
}
{
"quorum_delta": "41469707173777717318245825935516662250",
"online_weight_quorum_percent": "50",
"online_weight_minimum": "60000000000000000000000000000000000000",
"online_stake_total": "82939414347555434636491651871033324568",
"peers_stake_total": "69026910610720098597176027400951402360",
"trended_stake_total": "81939414347555434636491651871033324568"
}
Optional "peer_details"
Boolean, false by default. If true, add account/ip/rep weight for each peer considered in the summation of peers_stake_total.
Response field "peers_stake_required"
The effective stake needed from directly connected peers for quorum. Per v19, this field is computed as max(quorum_delta, online_weight_minimum). If peers_stake_total is lower than this value, the node will not mark blocks as confirmed.
database_txn_tracker¶
v19.0+
Debug purposes only
This call is for internal diagnostics/debug purposes only. Do not rely on this interface being stable and do not use in a production system.
Returns a list of open database transactions which are equal or greater than the min_read_time or min_write_time for reads and read-writes respectively.
Request:
{
"action": "database_txn_tracker",
"min_read_time" : "1000",
"min_write_time" : "0"
}
{
"txn_tracking": [
{
"thread": "Blck processing", // Which thread held the transaction
"time_held_open": "2", // Seconds the transaction has currently been held open for
"write": "true", // If true it is a write lock, otherwise false.
"stacktrace": [
{
"name": "nano::mdb_store::tx_begin_write",
"address": "00007FF7142C5F86",
"source_file": "c:\\users\\wesley\\documents\\raiblocks\\nano\\node\\lmdb.cpp",
"source_line": "825"
},
{
"name": "nano::block_processor::process_batch",
"address": "00007FF714121EEA",
"source_file": "c:\\users\\wesley\\documents\\raiblocks\\nano\\node\\blockprocessor.cpp",
"source_line": "243"
},
{
"name": "nano::block_processor::process_blocks",
"address": "00007FF71411F8A6",
"source_file": "c:\\users\\wesley\\documents\\raiblocks\\nano\\node\\blockprocessor.cpp",
"source_line": "103"
},
...
]
}
... // other threads
]
}
delegators¶
Returns a list of pairs of delegator accounts and balances given a representative account
Request:
{
"action": "delegators",
"account": "nano_1111111111111111111111111111111111111111111111111117353trpda"
}
{
"delegators": {
"nano_13bqhi1cdqq8yb9szneoc38qk899d58i5rcrgdk5mkdm86hekpoez3zxw5sd": "500000000000000000000000000000000000",
"nano_17k6ug685154an8gri9whhe5kb5z1mf5w6y39gokc1657sh95fegm8ht1zpn": "961647970820730000000000000000000000"
}
}
Optional parameters:
threshold: minimum required balance for a delegating account to be included in the responsecount: number of delegators to returnstart: account in the list you would like to start after, to allow for paging responses
delegators_count¶
Get number of delegators for a specific representative account
Request:
{
"action": "delegators_count",
"account": "nano_1111111111111111111111111111111111111111111111111117353trpda"
}
{
"count": "2"
}
deterministic_key¶
Derive deterministic keypair from seed based on index
Request:
{
"action": "deterministic_key",
"seed": "0000000000000000000000000000000000000000000000000000000000000000",
"index": "0"
}
{
"private": "9F0E444C69F77A49BD0BE89DB92C38FE713E0963165CCA12FAF5712D7657120F",
"public": "C008B814A7D269A1FA3C6528B19201A24D797912DB9996FF02A1FF356E45552B",
"account": "nano_3i1aq1cchnmbn9x5rsbap8b15akfh7wj7pwskuzi7ahz8oq6cobd99d4r3b7"
}
epoch_upgrade¶
enable_control required
Debug purposes only
This call is for internal diagnostics/debug purposes only. Do not rely on this interface being stable and do not use in a production system.
Upgrade network to new epoch with epoch signer private key. This spawns a background task to iterate over all accounts and add the epoch block to any accounts that do not have it. It will return { "started" = "1" } if the background task was spawned successfully or { "started" = "0" } if the operation could not be started. Reasons for not being able to start the operations include the node being stopped and a previous being in progress. epoch can be set to either 1 (representing the network upgrade to state blocks) or 2 (representing the network upgrade for increase work difficulty).
Dangerous RPC calls controlled by enable_control
This RPC command/option requires enable_control to be enabled within the RPC config file. Enabling this means that anyone with access to the RPC port could potentially access wallet funds, stop the node from running and take other dangerous actions. Use caution when enabling this option, especially with external RPC access available. For more details see the Node Security page.
Request:
{
"action": "epoch_upgrade",
"epoch": "1",
"key": "0000000000000000000000000000000000000000000000000000000000000000"
}
{
"started": "1"
}
Number. Determines limit of number of accounts to upgrade.
Optional "threads"
Number. Determines limit of work threads to use for concurrent upgrade processes (useful with multiple work peers or high work peer latency).
frontier_count¶
Reports the number of accounts in the ledger
Request:
{
"action": "frontier_count"
}
{
"count": "920471"
}
frontiers¶
Returns a list of pairs of account and block hash representing the head block starting at account up to count
Request:
{
"action": "frontiers",
"account": "nano_1111111111111111111111111111111111111111111111111111hifc8npp",
"count": "1"
}
{
"frontiers" : {
"nano_3e3j5tkog48pnny9dmfzj1r16pg8t1e76dz5tmac6iq689wyjfpi00000000": "000D1BAEC8EC208142C99059B393051BAC8380F9B5A2E6B2489A277D81789F3F"
}
}
keepalive¶
enable_control required
Tells the node to send a keepalive packet to address:port
Dangerous RPC calls controlled by enable_control
This RPC command/option requires enable_control to be enabled within the RPC config file. Enabling this means that anyone with access to the RPC port could potentially access wallet funds, stop the node from running and take other dangerous actions. Use caution when enabling this option, especially with external RPC access available. For more details see the Node Security page.
Request:
{
"action": "keepalive",
"address": "::ffff:192.169.0.1",
"port": "1024"
}
{
"started": "1"
}
key_create¶
Generates an adhoc random keypair
Request:
{
"action": "key_create"
}
{
"private": "781186FB9EF17DB6E3D1056550D9FAE5D5BBADA6A6BC370E4CBB938B1DC71DA3",
"public": "3068BB1CA04525BB0E416C485FE6A67FD52540227D267CC8B6E8DA958A7FA039",
"account": "nano_1e5aqegc1jb7qe964u4adzmcezyo6o146zb8hm6dft8tkp79za3sxwjym5rx"
}
key_expand¶
Derive public key and account number from private key
Request:
{
"action": "key_expand",
"key": "781186FB9EF17DB6E3D1056550D9FAE5D5BBADA6A6BC370E4CBB938B1DC71DA3"
}
{
"private": "781186FB9EF17DB6E3D1056550D9FAE5D5BBADA6A6BC370E4CBB938B1DC71DA3",
"public": "3068BB1CA04525BB0E416C485FE6A67FD52540227D267CC8B6E8DA958A7FA039",
"account": "nano_1e5aqegc1jb7qe964u4adzmcezyo6o146zb8hm6dft8tkp79za3sxwjym5rx"
}
ledger¶
enable_control required Returns frontier, open block, change representative block, balance, last modified timestamp from local database & block count starting at account up to count
Dangerous RPC calls controlled by enable_control
This RPC command/option requires enable_control to be enabled within the RPC config file. Enabling this means that anyone with access to the RPC port could potentially access wallet funds, stop the node from running and take other dangerous actions. Use caution when enabling this option, especially with external RPC access available. For more details see the Node Security page.
Includes unconfirmed blocks
This call may return results that include unconfirmed blocks, so it should not be used in any processes or integrations requiring only details from blocks confirmed by the network.
Request:
{
"action": "ledger",
"account": "nano_1111111111111111111111111111111111111111111111111111hifc8npp",
"count": "1"
}
{
"accounts": {
"nano_11119gbh8hb4hj1duf7fdtfyf5s75okzxdgupgpgm1bj78ex3kgy7frt3s9n": {
"frontier": "E71AF3E9DD86BBD8B4620EFA63E065B34D358CFC091ACB4E103B965F95783321",
"open_block": "643B77F1ECEFBDBE1CC909872964C1DBBE23A6149BD3CEF2B50B76044659B60F",
"representative_block": "643B77F1ECEFBDBE1CC909872964C1DBBE23A6149BD3CEF2B50B76044659B60F",
"balance": "0",
"modified_timestamp": "1511476234",
"block_count": "2"
}
}
}
Booleans, false by default. Additionally returns representative, voting weight, receivable balance for each account
Request:
{
"action": "ledger",
"account": "nano_1111111111111111111111111111111111111111111111111111hifc8npp",
"count": "1",
"representative": "true",
"weight": "true",
"receivable": "true"
}
{
"accounts": {
"nano_11119gbh8hb4hj1duf7fdtfyf5s75okzxdgupgpgm1bj78ex3kgy7frt3s9n": {
"frontier": "E71AF3E9DD86BBD8B4620EFA63E065B34D358CFC091ACB4E103B965F95783321",
"open_block": "643B77F1ECEFBDBE1CC909872964C1DBBE23A6149BD3CEF2B50B76044659B60F",
"representative_block": "643B77F1ECEFBDBE1CC909872964C1DBBE23A6149BD3CEF2B50B76044659B60F",
"balance": "0",
"modified_timestamp": "1511476234",
"block_count": "2",
"representative": "nano_1anrzcuwe64rwxzcco8dkhpyxpi8kd7zsjc1oeimpc3ppca4mrjtwnqposrs",
"weight": "0",
"pending": "0",
"receivable": "0"
}
}
}
UNIX timestamp (number), 0 by default. Return only accounts modified in local database after specific timestamp
Optional "sorting"
Boolean, false by default. Additional sorting accounts in descending order
NOTE: The "count" option is ignored if "sorting" is specified
Optional "threshold"
Number (128 bit, decimal), default 0. Return only accounts with balance above threshold. If receivable is also given, the number compared with the threshold is the sum of account balance and receivable balance.
node_id¶
enable_control required
Debug purposes only
This call is for internal diagnostics/debug purposes only. Do not rely on this interface being stable and do not use in a production system.
Returns private key, public key and node ID number with checksum (similar to account representation) from the existing node ID created on startup. "as_account" field is deprecated
the node_id has a node_ prefix
Dangerous RPC calls controlled by enable_control
This RPC command/option requires enable_control to be enabled within the RPC config file. Enabling this means that anyone with access to the RPC port could potentially access wallet funds, stop the node from running and take other dangerous actions. Use caution when enabling this option, especially with external RPC access available. For more details see the Node Security page.
Request:
{
"action": "node_id"
}
{
"private": "2AD75C9DC20EA497E41722290C4DC966ECC4D6C75CAA4E447961F918FD73D8C7",
"public": "78B11E1777B8E7DF9090004376C3EDE008E84680A497C0805F68CA5928626E1C",
"as_account": "nano_1y7j5rdqhg99uyab1145gu3yur1ax35a3b6qr417yt8cd6n86uiw3d4whty3",
"node_id": "node_1y7j5rdqhg99uyab1145gu3yur1ax35a3b6qr417yt8cd6n86uiw3d4whty3"
}
node_id_delete¶
enable_control required
Debug purposes only
This call is for internal diagnostics/debug purposes only. Do not rely on this interface being stable and do not use in a production system.
Removing node ID (restart required to take effect)
Dangerous RPC calls controlled by enable_control
This RPC command/option requires enable_control to be enabled within the RPC config file. Enabling this means that anyone with access to the RPC port could potentially access wallet funds, stop the node from running and take other dangerous actions. Use caution when enabling this option, especially with external RPC access available. For more details see the Node Security page.
Request:
{
"action": "node_id_delete"
}
{
"deprecated": "1"
}
peers¶
Returns a list of pairs of online peer IPv6:port and its node protocol network version
Request:
{
"action": "peers"
}
Response:
{
"peers": {
"[::ffff:172.17.0.1]:32841": "16"
}
}
Optional "peer_details"
Boolean, false by default. Returns a list of peers IPv6:port with its node protocol network version and node ID. The node ID is random and is not a Nano address. type returns tcp, as udp was deprecated and is not longer used for peering with that node.
the node_id has a node_ prefix
Request:
{
"action": "peers",
"peer_details": "true"
}
Response:
{
"peers": {
"[::ffff:172.17.0.1]:7075": {
"protocol_version": "18",
"node_id": "node_1y7j5rdqhg99uyab1145gu3yur1ax35a3b6qr417yt8cd6n86uiw3d4whty3",
"type": "tcp"
}
}
}
pending¶
Deprecated in V23.0+. Replaced by receivable
pending_exists¶
Deprecated in V23.0+. Replaced by receivable_exists
populate_backlog¶
Scans all accounts, checks for unconfirmed blocks in account chains, and then queues those blocks for confirmation via the election scheduler. Useful for local test networks, since default backlog population is normally done over longer intervals (e.g. 5 minutes).
Request
{
"action": "populate_backlog"
}
{
"success": ""
}
process¶
Publish block to the network. Using the optional json_block is recommended.
Including subtype in process RPC calls highly recommended
In order to avoid potential incorrect sends including the optional subtype parameter on all process RPC calls is highly recommended. In the next version of the RPC this parameter will be required.
Request:
{
"action": "process",
"json_block": "true",
"subtype": "send",
"block": {
"type": "state",
"account": "nano_1qato4k7z3spc8gq1zyd8xeqfbzsoxwo36a45ozbrxcatut7up8ohyardu1z",
"previous": "6CDDA48608C7843A0AC1122BDD46D9E20E21190986B19EAC23E7F33F2E6A6766",
"representative": "nano_3pczxuorp48td8645bs3m6c3xotxd3idskrenmi65rbrga5zmkemzhwkaznh",
"balance": "40200000001000000000000000000000000",
"link": "87434F8041869A01C8F6F263B87972D7BA443A72E0A97D7A3FD0CCC2358FD6F9",
"link_as_account": "nano_33t5by1653nt196hfwm5q3wq7oxtaix97r7bhox5zn8eratrzoqsny49ftsd",
"signature": "A5DB164F6B81648F914E49CAB533900C389FAAD64FBB24F6902F9261312B29F730D07E9BCCD21D918301419B4E05B181637CF8419ED4DCBF8EF2539EB2467F07",
"work": "000bc55b014e807d"
}
}
{
"hash": "E2FB233EF4554077A7BF1AA85851D5BF0B36965D2B0FB504B2BC778AB89917D3"
}
Boolean, false by default. Manually forcing fork resolution if processed block is not accepted as fork
Optional "subtype"
String, empty by default. Additional check for state blocks subtype, i.e. prevent accidental sending to incorrect accounts instead of receiving receivable blocks. Options:
send- account balance is reducedreceive- account balance is increasedopen- first block on account with account balance initially set higher than 0change- account balance is unchanged, representative field value changed to valid public addressepoch- block signed with epoch signer private key (does not allow balance or representative changes)
Optional "json_block"
Boolean, default "false". If "true", "block" must contain a JSON subtree instead of a JSON string.
Optional "async"
Boolean, default "false". If "true", requests will add the blocks to the block processor queue and {"started":"1"} will be immediately returned, instead of waiting for block process completion to return. To know if the block was properly processed, monitor the WebSocket topic new_unconfirmed_block and a notification for that successful block will be sent.
receivable¶
Returns a list of block hashes which have not yet been received by this account.
Request:
{
"action": "receivable",
"account": "nano_1111111111111111111111111111111111111111111111111117353trpda",
"count": "1"
}
{
"blocks": [ "000D1BAEC8EC208142C99059B393051BAC8380F9B5A2E6B2489A277D81789F3F" ]
}
Number. Determines limit of number of blocks to return.
Optional "threshold"
Number (128 bit, decimal). Returns a list of receivable block hashes with amount more or equal to threshold
Request:
{
"action": "receivable",
"account": "nano_1111111111111111111111111111111111111111111111111117353trpda",
"count": "1",
"threshold": "1000000000000000000000000"
}
{
"blocks" : {
"000D1BAEC8EC208142C99059B393051BAC8380F9B5A2E6B2489A277D81789F3F": "6000000000000000000000000000000"
}
}
Boolean, false by default. Returns a list of receivable block hashes with amount and source accounts
Request:
{
"action": "receivable",
"account": "nano_1111111111111111111111111111111111111111111111111117353trpda",
"count": "1",
"source": "true"
}
{
"blocks" : {
"000D1BAEC8EC208142C99059B393051BAC8380F9B5A2E6B2489A277D81789F3F": {
"amount": "6000000000000000000000000000000",
"source": "nano_3dcfozsmekr1tr9skf1oa5wbgmxt81qepfdnt7zicq5x3hk65fg4fqj58mbr"
}
}
}
Boolean, false by default. Include active blocks without finished confirmations
Request:
{
"action": "receivable",
"account": "nano_1111111111111111111111111111111111111111111111111117353trpda",
"count": "1",
"include_active": "true"
}
Optional "min_version"
Boolean, false by default. Returns the minimum version (epoch) of a block which can pocket this receivable block.
Optional "sorting"
Boolean, false by default. Additionally sorts the blocks by their amounts in descending order.
If used with "count" returns the absolute sorted values.
If used with "count" only sorts relative to the first receivable entries found up to count so not necessarily the ones with the largest receivable balance.
Optional "include_only_confirmed"
Boolean, true by default (), previously false by default. Only returns confirmed blocks but with the caveat that their confirmation height might not be up-to-date yet. If false, unconfirmed blocks will also be returned.
receivable_exists¶
Check whether block is receivable by hash
Request:
{
"action": "receivable_exists",
"hash": "000D1BAEC8EC208142C99059B393051BAC8380F9B5A2E6B2489A277D81789F3F"
}
{
"exists" : "1"
}
Optional "include_active"
Boolean, false by default. Include active blocks without finished confirmations
Request:
{
"action": "receivable_exists",
"hash": "000D1BAEC8EC208142C99059B393051BAC8380F9B5A2E6B2489A277D81789F3F",
"include_active": "true"
}
Optional "include_only_confirmed"
Boolean, true by default (), previously false by default. Only returns confirmed blocks but with the caveat that their confirmation height might not be up-to-date yet. If false, unconfirmed blocks will also be returned.
representatives¶
Returns a list of pairs of representative and its voting weight
Request:
{
"action": "representatives"
}
{
"representatives": {
"nano_1111111111111111111111111111111111111111111111111117353trpda": "3822372327060170000000000000000000000",
"nano_1111111111111111111111111111111111111111111111111awsq94gtecn": "30999999999999999999999999000000",
"nano_114nk4rwjctu6n6tr6g6ps61g1w3hdpjxfas4xj1tq6i8jyomc5d858xr1xi": "0"
}
}
Number. Returns a list of pairs of representative and its voting weight up to count
Optional "sorting"
Boolean, false by default. Additional sorting representatives in descending order
NOTE: The "count" option is ignored if "sorting" is specified
representatives_online¶
Returns a list of online representative accounts that have voted recently
Request:
{
"action": "representatives_online"
}
{
"representatives": [
"nano_1111111111111111111111111111111111111111111111111117353trpda",
"nano_1111111111111111111111111111111111111111111111111awsq94gtecn",
"nano_114nk4rwjctu6n6tr6g6ps61g1w3hdpjxfas4xj1tq6i8jyomc5d858xr1xi"
]
}
Boolean, false by default. Returns voting weight for each representative.
Response:
{
"representatives": {
"nano_114nk4rwjctu6n6tr6g6ps61g1w3hdpjxfas4xj1tq6i8jyomc5d858xr1xi": {
"weight": "150462654614686936429917024683496890"
}
}
}
Optional "accounts"
Array of accounts. Returned list is filtered for only these accounts.
Request:
{
"action": "representatives_online",
"accounts": ["nano_1q3hqecaw15cjt7thbtxu3pbzr1eihtzzpzxguoc37bj1wc5ffoh7w74gi6p", "nano_1111111111111111111111111111111111111111111111111117353trpda"]
}
{
"representatives": [
"nano_1q3hqecaw15cjt7thbtxu3pbzr1eihtzzpzxguoc37bj1wc5ffoh7w74gi6p"
]
}
republish¶
Rebroadcast blocks starting at hash to the network
Request:
{
"action": "republish",
"hash": "991CF190094C00F0B68E2E5F75F6BEE95A2E0BD93CEAA4A6734DB9F19B728948"
}
{
"success": "",
"blocks": [
"991CF190094C00F0B68E2E5F75F6BEE95A2E0BD93CEAA4A6734DB9F19B728948",
"A170D51B94E00371ACE76E35AC81DC9405D5D04D4CEBC399AEACE07AE05DD293"
]
}
Optional "sources"
Boolean, false by default. Additionally rebroadcast source chain blocks for receive/open up to sources depth
Request:
{
"action": "republish",
"hash": "90D0C16AC92DD35814E84BFBCC739A039615D0A42A76EF44ADAEF1D99E9F8A35",
"count": "1",
"sources": "2"
}
{
"blocks": [
"991CF190094C00F0B68E2E5F75F6BEE95A2E0BD93CEAA4A6734DB9F19B728948",
"A170D51B94E00371ACE76E35AC81DC9405D5D04D4CEBC399AEACE07AE05DD293",
"90D0C16AC92DD35814E84BFBCC739A039615D0A42A76EF44ADAEF1D99E9F8A35"
]
}
Optional "destinations"
Boolean, false by default. Additionally rebroadcast destination chain blocks from receive up to destinations depth
Request:
{
"action": "republish",
"hash": "A170D51B94E00371ACE76E35AC81DC9405D5D04D4CEBC399AEACE07AE05DD293",
"count": "1",
"destinations": "2"
}
{
"blocks": [
"A170D51B94E00371ACE76E35AC81DC9405D5D04D4CEBC399AEACE07AE05DD293",
"90D0C16AC92DD35814E84BFBCC739A039615D0A42A76EF44ADAEF1D99E9F8A35",
"18563C814A54535B7C12BF76A0E23291BA3769536634AB90AD0305776A533E8E"
]
}
sign¶
Signing provided block with private key or key of account from wallet. Using the optional json_block is recommended .
Request with private key:
{
"action": "sign",
"json_block": "true",
"key": "1D3759BB2CA187A66875D3B8497624159A576FD315E07F702B99B92BC59FC14A",
"block": {
"type": "state",
"account": "nano_1qato4k7z3spc8gq1zyd8xeqfbzsoxwo36a45ozbrxcatut7up8ohyardu1z",
"previous": "6CDDA48608C7843A0AC1122BDD46D9E20E21190986B19EAC23E7F33F2E6A6766",
"representative": "nano_3pczxuorp48td8645bs3m6c3xotxd3idskrenmi65rbrga5zmkemzhwkaznh",
"balance": "40200000001000000000000000000000000",
"link": "87434F8041869A01C8F6F263B87972D7BA443A72E0A97D7A3FD0CCC2358FD6F9",
"link_as_account": "nano_33t5by1653nt196hfwm5q3wq7oxtaix97r7bhox5zn8eratrzoqsny49ftsd",
"signature": "A5DB164F6B81648F914E49CAB533900C389FAAD64FBB24F6902F9261312B29F730D07E9BCCD21D918301419B4E05B181637CF8419ED4DCBF8EF2539EB2467F07",
"work": "000bc55b014e807d"
}
}
Request with account from wallet:
{
"action": "sign",
"json_block": "true",
"wallet": "000D1BAEC8EC208142C99059B393051BAC8380F9B5A2E6B2489A277D81789F3F",
"account": "nano_18ky5chy5ws89oi46ki4zjy6x5ezpmj98zg6icwke9bmuy99nosieyqf8c1h",
"block": {
"type": "state",
"account": "nano_1qato4k7z3spc8gq1zyd8xeqfbzsoxwo36a45ozbrxcatut7up8ohyardu1z",
"previous": "6CDDA48608C7843A0AC1122BDD46D9E20E21190986B19EAC23E7F33F2E6A6766",
"representative": "nano_3pczxuorp48td8645bs3m6c3xotxd3idskrenmi65rbrga5zmkemzhwkaznh",
"balance": "40200000001000000000000000000000000",
"link": "87434F8041869A01C8F6F263B87972D7BA443A72E0A97D7A3FD0CCC2358FD6F9",
"link_as_account": "nano_33t5by1653nt196hfwm5q3wq7oxtaix97r7bhox5zn8eratrzoqsny49ftsd",
"signature": "A5DB164F6B81648F914E49CAB533900C389FAAD64FBB24F6902F9261312B29F730D07E9BCCD21D918301419B4E05B181637CF8419ED4DCBF8EF2539EB2467F07",
"work": "000bc55b014e807d"
}
}
{
"signature": "2A71F3877033F5966735F260E906BFCB7FA82CDD543BCD1224F180F85A96FC26CB3F0E4180E662332A0DFE4EE6A0F798A71C401011E635604E532383EC08C70D",
"block": {
"type": "state",
"account": "nano_1qato4k7z3spc8gq1zyd8xeqfbzsoxwo36a45ozbrxcatut7up8ohyardu1z",
"previous": "6CDDA48608C7843A0AC1122BDD46D9E20E21190986B19EAC23E7F33F2E6A6766",
"representative": "nano_3pczxuorp48td8645bs3m6c3xotxd3idskrenmi65rbrga5zmkemzhwkaznh",
"balance": "40200000001000000000000000000000000",
"link": "87434F8041869A01C8F6F263B87972D7BA443A72E0A97D7A3FD0CCC2358FD6F9",
"link_as_account": "nano_33t5by1653nt196hfwm5q3wq7oxtaix97r7bhox5zn8eratrzoqsny49ftsd",
"signature": "2A71F3877033F5966735F260E906BFCB7FA82CDD543BCD1224F180F85A96FC26CB3F0E4180E662332A0DFE4EE6A0F798A71C401011E635604E532383EC08C70D",
"work": "000bc55b014e807d"
}
}
Optional "json_block"
Default "false". If "true", the input "block" must contain a JSON subtree instead of a JSON string. In addition, the response block will be a JSON subtree.
Optional sign block hash
Requires configuration changes. Set "rpc.enable_sign_hash" to "true"
Request:
{
"action": "sign",
"hash": "E2FB233EF4554077A7BF1AA85851D5BF0B36965D2B0FB504B2BC778AB89917D3"
}
{
"signature": "2A71F3877033F5966735F260E906BFCB7FA82CDD543BCD1224F180F85A96FC26CB3F0E4180E662332A0DFE4EE6A0F798A71C401011E635604E532383EC08C70D"
}
stats¶
For configuration and other details, please see Statistics from RPC
Request counters:
{
"action": "stats",
"type": "counters"
}
Counters response:
{
"type": "counters",
"created": "2018.03.29 01:46:36",
"entries": [
{
"time": "01:46:36",
"type": "traffic_tcp",
"detail": "all",
"dir": "in",
"value": "3122792"
},
{
"time": "01:46:36",
"type": "traffic_tcp",
"detail": "all",
"dir": "out",
"value": "203184"
}
...
]
}
"stat_duration_seconds": the number of seconds since startup or since the last "stats_clear" call_
Request samples:
{
"action": "stats",
"type": "samples"
}
Samples response:
{
"type": "samples",
"created": "2018.03.29 01:47:08",
"entries": [
{
"time": "01:47:04",
"type": "traffic_tcp",
"detail": "all",
"dir": "in",
"value": "59480"
},
{
"time": "01:47:05",
"type": "traffic_tcp",
"detail": "all",
"dir": "in",
"value": "44496"
}
...
]
}
NOTE: This call is for debug purposes only and is unstable as returned objects may be frequently changed.
Request objects:
{
"action": "stats",
"type": "objects"
}
Objects response:
{
"node": {
"ledger": {
"bootstrap_weights": {
"count": "125",
"size": "7000"
}
},
"peers": {
"peers": {
"count": "38",
"size": "7296"
},
"attempts": {
"count": "95",
"size": "3800"
},
},
...
}
}
NOTE: This call is for debug purposes only and is unstable as returned objects may be frequently changed and will be different depending on the ledger backend.
Request database:
{
"action": "stats",
"type": "database"
}
Database response:
LMDB:
{
"branch_pages": "0",
"depth": "1",
"entries": "11",
"leaf_pages": "1",
"overflow_pages": "0",
"page_size": "4096"
}
{
"cur-size-all-mem-tables": "74063072",
"size-all-mem-tables": "487744504",
"estimate-table-readers-mem": "113431016",
"estimate-live-data-size": "17756425993",
"compaction-pending": "0",
"estimate-num-keys": "81835964",
"estimate-pending-compaction-bytes": "0",
"total-sst-files-size": "20350606013",
"block-cache-capacity": "318767104",
"block-cache-usage": "150310696"
}
stats_clear¶
Clears all collected statistics. The "stat_duration_seconds" value in the "stats" action is also reset.
Request:
{
"action": "stats_clear"
}
{
"success": ""
}
stop¶
enable_control required
Method to safely shutdown node
Dangerous RPC calls controlled by enable_control
This RPC command/option requires enable_control to be enabled within the RPC config file. Enabling this means that anyone with access to the RPC port could potentially access wallet funds, stop the node from running and take other dangerous actions. Use caution when enabling this option, especially with external RPC access available. For more details see the Node Security page.
Request:
{
"action": "stop"
}
{
"success": ""
}
successors¶
Returns a list of block hashes in the account chain starting at block up to count (direction from open block up to frontier, from older blocks to newer). Will list all blocks up to frontier (latest block) of this chain when count is set to "-1". The requested block hash is included in the answer.
Request:
{
"action": "successors",
"block": "991CF190094C00F0B68E2E5F75F6BEE95A2E0BD93CEAA4A6734DB9F19B728948",
"count": "1"
}
{
"blocks" : [
"991CF190094C00F0B68E2E5F75F6BEE95A2E0BD93CEAA4A6734DB9F19B728948"
]
}
Number, 0 by default. Return the account chain block hashes offset by the specified number of blocks
Optional "reverse"
Boolean, false by default. Returns a consecutive list of block hashes in the account chain starting at block back to count (direction from frontier back to open block, from newer blocks to older). Equal to chain
telemetry¶
Return metrics from other nodes on the network. By default, returns a summarized view of the whole network. See below for details on obtaining local telemetry data.
Networking - node telemetry contains more detailed information on the protocol implementation of telemetry.
Request:
{
"action": "telemetry"
}
{
"block_count": "5777903",
"cemented_count": "688819",
"unchecked_count": "443468",
"account_count": "620750",
"bandwidth_cap": "1572864",
"peer_count": "32",
"protocol_version": "18",
"uptime": "556896",
"genesis_block": "F824C697633FAB78B703D75189B7A7E18DA438A2ED5FFE7495F02F681CD56D41",
"major_version": "21",
"minor_version": "0",
"patch_version": "0",
"pre_release_version": "0",
"maker": "0",
"timestamp": "1587055945990",
"active_difficulty": "fffffff800000000"
}
This contains a summarized view of the network with 10% of lower/upper bound results removed to reduce the effect of outliers. Returned values are calculated as follows:
| Field Name | Response details |
|---|---|
| block_count | average count of blocks in ledger (including unconfirmed) |
| cemented_count | average count of blocks cemented in ledger (only confirmed) |
| unchecked_count | average count of unchecked blocks. This should only be considered an estimate as nodes running RocksDB may not return exact counts. |
| account_count | average count of accounts in ledger |
| bandwidth_cap | 0 = unlimited; the mode is chosen if there is more than 1 common result otherwise the results are averaged (excluding 0) |
| peer_count | average count of peers nodes are connected to |
| *_version | mode (most common) of (protocol, major, minor, patch, pre_release) versions |
| uptime | average number of seconds since the UTC epoch at the point where the response is sent from the peer |
| genesis_block | mode (most common) of genesis block hashes |
| maker | mode (most common), meant for third party node software implementing the protocol so that it can be distinguished, 0 = Nano Foundation, 1 = Nano Foundation pruned node |
| timestamp | number of milliseconds since the UTC epoch at the point where the response is sent from the peer |
| active_difficulty | V22.0+ returns minimum network difficulty due to deprecated active difficulty measurements up to V21.3 returns average of the current network difficulty, see active_difficulty "network_current" |
This only returns values which have been cached by the ongoing polling of peer metric data. Each response is cached for 60 seconds on the main network and 15 seconds on beta; a few additional seconds are added on for response delays.
Optional "raw"
When setting raw to true metrics from all nodes are displayed. It additionally contains signature, node_id, address and port from each peer.
Request:
{
"action": "telemetry",
"raw" : "true"
}
Response:
{
"metrics": [
{
"block_count": "5777903",
...
"node_id": "node_1cmi8difuruopgzpnb4ybrnnj5rproxwuwe5mad7ucbsekakiwn37qqg1zo5",
"signature": "5F8DEE5F895D53E122FDEB4B1B4118A41F9DDB818C6B299B09DF59131AF9F201BB7057769423F6B0C868B57509177B54D5D2C731405FE607527F5E2B6B2E290F",
"address": "::ffff:152.89.106.89",
"port": "54000"
},
{
"block_count": "5777902",
...
"node_id": "node_3ipxdjrha3rfg9h3spiz5jkprw8kdj7bph9fir51kf6pmryzznsyhakqznk3",
"signature": "D691B855D9EC70EA6320DE609EB379EB706845433E034AD22721E8F91BF3A26156F40CCB2E98653F1E63D4CE5F10F530A835DE1B154D1213464E3B9BB9BE4908",
"address": "::ffff:95.216.205.215",
"port": "54006"
}
...
]
}
Optional "address" & "port"
Get metrics from a specific peer. It accepts both ipv4 and ipv6 addresses
{
"action": "telemetry",
"address": "246.125.123.456",
"port": "7075"
}
Requesting telemetry data from the local node
Metrics for the local node can be requested using the peering port and any loopback address 127.0.0.1, ::1 or [::1]
validate_account_number¶
Check whether account is a valid account number using checksum
Request:
{
"action": "validate_account_number",
"account": "nano_1111111111111111111111111111111111111111111111111117353trpda"
}
{
"valid" : "1"
}
version¶
Returns version information for RPC, Store, Protocol (network), Node (Major & Minor version).
Returns the Network label and identifier (hash of the genesis open block), and Build Info.
Returns Database backend information.
_RPC Version always returns "1"
Request:
{
"action": "version"
}
{
"rpc_version": "1",
"store_version": "14",
"protocol_version": "17",
"node_vendor": "Nano 20.0",
"store_vendor": "LMDB 0.9.23", // since V21.0
"network": "live", // since v20.0
"network_identifier": "991CF190094C00F0B68E2E5F75F6BEE95A2E0BD93CEAA4A6734DB9F19B728948", // since v20.0
"build_info": "Build Info <git hash> \"<compiler> version \" \"<compiler version string>\" \"BOOST <boost version>\" BUILT \"<build date>\"" // since v20.0
}
unchecked¶
Returns a list of pairs of unchecked block hashes and their json representation up to count. Using the optional json_block is recommended since v20.0.
Request:
{
"action": "unchecked",
"json_block": "true",
"count": "1",
}
{
"blocks": {
"87434F8041869A01C8F6F263B87972D7BA443A72E0A97D7A3FD0CCC2358FD6F9": {
"type": "state",
"account": "nano_1ipx847tk8o46pwxt5qjdbncjqcbwcc1rrmqnkztrfjy5k7z4imsrata9est",
"previous": "CE898C131AAEE25E05362F247760F8A3ACF34A9796A5AE0D9204E86B0637965E",
"representative": "nano_1stofnrxuz3cai7ze75o174bpm7scwj9jn3nxsn8ntzg784jf1gzn1jjdkou",
"balance": "5606157000000000000000000000000000000",
"link": "5D1AA8A45F8736519D707FCB375976A7F9AF795091021D7E9C7548D6F45DD8D5",
"link_as_account": "nano_1qato4k7z3spc8gq1zyd8xeqfbzsoxwo36a45ozbrxcatut7up8ohyardu1z",
"signature": "82D41BC16F313E4B2243D14DFFA2FB04679C540C2095FEE7EAE0F2F26880AD56DD48D87A7CC5DD760C5B2D76EE2C205506AA557BF00B60D8DEE312EC7343A501",
"work": "8a142e07a10996d5"
}
}
}
unchecked_clear¶
enable_control required
Clear unchecked synchronizing blocks
Dangerous RPC calls controlled by enable_control
This RPC command/option requires enable_control to be enabled within the RPC config file. Enabling this means that anyone with access to the RPC port could potentially access wallet funds, stop the node from running and take other dangerous actions. Use caution when enabling this option, especially with external RPC access available. For more details see the Node Security page.
Request:
{
"action": "unchecked_clear"
}
{
"success": ""
}
unchecked_get¶
Retrieves a json representation of unchecked synchronizing block by hash. Using the optional json_block is recommended .
Request:
{
"action": "unchecked_get",
"json_block": "true",
"hash": "19BF0C268C2D9AED1A8C02E40961B67EA56B1681DE274CD0C50F3DD972F0655C"
}
{
"modified_timestamp": "1565856525",
"contents": {
"type": "state",
"account": "nano_1hmqzugsmsn4jxtzo5yrm4rsysftkh9343363hctgrjch1984d8ey9zoyqex",
"previous": "009C587914611E83EE7F75BD9C000C430C720D0364D032E84F37678D7D012911",
"representative": "nano_1stofnrxuz3cai7ze75o174bpm7scwj9jn3nxsn8ntzg784jf1gzn1jjdkou",
"balance": "189012679592109992600249228",
"link": "0000000000000000000000000000000000000000000000000000000000000000",
"link_as_account": "nano_1111111111111111111111111111111111111111111111111111hifc8npp",
"signature": "845C8660750895843C013CE33E31B80EF0A7A69E52DDAF74A5F1BDFAA9A52E4D9EA2C3BE1AB0BD5790FCC1AD9B7A3D2F4B44EECE4279A8184D414A30A1B4620F",
"work": "0dfb32653e189699"
}
}
Default "false". If "true", "contents" will contain a JSON subtree instead of a JSON string.
unchecked_keys¶
Retrieves unchecked database keys, blocks hashes & a json representations of unchecked receivable blocks starting from key up to count. Using the optional json_block is recommended .
Known issue with RocksDB: RPC unchecked_keys not working properly
Issue: The RPC unchecked_keys is returning 0 for all calls when used with the RocksDB backend. This known issue will be resolved in a future release.
Solution: Until the issue is resolved any integrations using this command should remain on the existing LMDB backend
Request:
{
"action": "unchecked_keys",
"json_block": "true",
"key": "19BF0C268C2D9AED1A8C02E40961B67EA56B1681DE274CD0C50F3DD972F0655C",
"count": "1"
}
{
"unchecked": [
{
"key": "19BF0C268C2D9AED1A8C02E40961B67EA56B1681DE274CD0C50F3DD972F0655C",
"hash": "A1A8558CBABD3F7C1D70F8CB882355F2EF688E7F30F5FDBD0204CAE157885056",
"modified_timestamp": "1565856744",
"contents": {
"type": "state",
"account": "nano_1hmqzugsmsn4jxtzo5yrm4rsysftkh9343363hctgrjch1984d8ey9zoyqex",
"previous": "19BF0C268C2D9AED1A8C02E40961B67EA56B1681DE274CD0C50F3DD972F0655C",
"representative": "nano_1stofnrxuz3cai7ze75o174bpm7scwj9jn3nxsn8ntzg784jf1gzn1jjdkou",
"balance": "189012679592109992600249226",
"link": "0000000000000000000000000000000000000000000000000000000000000000",
"link_as_account": "nano_1111111111111111111111111111111111111111111111111111hifc8npp",
"signature": "FF5D49925AD3C8705E6EEDD993E8C4120E6107D7F1CB53B287773448DEA0B1D32918E67804248FC83609F0D93401D833DFA33127F21B6CD02F75D6E31A00450A",
"work": "8193ddf00947e694"
}
}
]
}
Optional "json_block"
Default "false". If "true", "contents" will contain a JSON subtree instead of a JSON string.
unopened¶
enable_control required
Returns the total receivable balance for unopened accounts in the local database, starting at account (optional) up to count (optional), sorted by account number. Notes: By default excludes the burn account.
Dangerous RPC calls controlled by enable_control
This RPC command/option requires enable_control to be enabled within the RPC config file. Enabling this means that anyone with access to the RPC port could potentially access wallet funds, stop the node from running and take other dangerous actions. Use caution when enabling this option, especially with external RPC access available. For more details see the Node Security page.
Request:
{
"action": "unopened",
"account": "nano_1111111111111111111111111111111111111111111111111111hifc8npp",
"count": "1"
}
Response:
{
"accounts": {
"nano_1111111111111111111111111111111111111111111111111111hifc8npp": "207034077034226183413773082289554618448"
}
}
Optional "threshold"
Number (128 bit, decimal), default 0. Return only accounts with total receivable balance above threshold.
uptime¶
Return node uptime in seconds
Request:
{
"action": "uptime"
}
{
"seconds": "6000"
}
work_cancel¶
enable_control required
Stop generating work for block
Dangerous RPC calls controlled by enable_control
This RPC command/option requires enable_control to be enabled within the RPC config file. Enabling this means that anyone with access to the RPC port could potentially access wallet funds, stop the node from running and take other dangerous actions. Use caution when enabling this option, especially with external RPC access available. For more details see the Node Security page.
Request:
{
"action": "work_cancel",
"hash": "718CC2121C3E641059BC1C2CFC45666C99E8AE922F7A807B7D07B62C995D79E2"
}
{
"success": ""
}
work_generate¶
enable_control required
Generates work for block. hash is the frontier of the account or in the case of an open block, the public key representation of the account which can be found with account_key.
Dangerous RPC calls controlled by enable_control
This RPC command/option requires enable_control to be enabled within the RPC config file. Enabling this means that anyone with access to the RPC port could potentially access wallet funds, stop the node from running and take other dangerous actions. Use caution when enabling this option, especially with external RPC access available. For more details see the Node Security page.
Request:
{
"action": "work_generate",
"hash": "718CC2121C3E641059BC1C2CFC45666C99E8AE922F7A807B7D07B62C995D79E2"
}
{
"work": "2b3d689bbcb21dca",
"difficulty": "fffffff93c41ec94", // of the resulting work
"multiplier": "1.182623871097636", // , calculated from default base difficulty
"hash": "718CC2121C3E641059BC1C2CFC45666C99E8AE922F7A807B7D07B62C995D79E2"
}
Optional "use_peers"
Boolean, false by default. If the optional use_peers parameter is set to true, then the node will query its work peers (if it has any).
Without this parameter, the node will only generate work locally.
Optional "difficulty"
Difficulty no longer useful
With the difficulty is no longer used for prioritization so targeting higher difficulty thresholds on work generation is not useful. However, this can still be used for targeting a lower difficulty for receive blocks. This option may be removed in a future release.
Difficulty value (16 hexadecimal digits string, 64 bit). Uses difficulty value to generate work. Defaults to the network base difficulty.
Optional "multiplier"
Multiplier no longer useful
With the difficulty is no longer used for prioritization so targeting higher multipliers on work generation is not useful. This option will be removed in a future release.
Multiplier from base difficulty (positive number). Uses equivalent difficulty as multiplier from base difficulty to generate work.
Note: overrides the difficulty parameter.
Optional "account"
A valid Nano account. If provided and use_peers is set to true, this information will be relayed to work peers.
Optional "version"
Work version string. Currently "work_1" is the default and only valid option.
Optional "block"
A valid Nano block (string or JSON). Using the optional json_block is recommended. If provided and difficulty or multiplier are both not given, RPC processor tries to calculate the appropriate difficulty threshold based on ledger data.
Note: block should be the one where the resulting work value will be used, not the previous block.
Optional "json_block"
Default "false". If "true", block in the request should contain a JSON subtree instead of a JSON string.
work_peer_add¶
enable_control required
Add specific IP address and port as work peer for node until restart
Dangerous RPC calls controlled by enable_control
This RPC command/option requires enable_control to be enabled within the RPC config file. Enabling this means that anyone with access to the RPC port could potentially access wallet funds, stop the node from running and take other dangerous actions. Use caution when enabling this option, especially with external RPC access available. For more details see the Node Security page.
Request:
{
"action": "work_peer_add",
"address": "::ffff:172.17.0.1",
"port": "7076"
}
{
"success": ""
}
work_peers¶
enable_control required
Dangerous RPC calls controlled by enable_control
This RPC command/option requires enable_control to be enabled within the RPC config file. Enabling this means that anyone with access to the RPC port could potentially access wallet funds, stop the node from running and take other dangerous actions. Use caution when enabling this option, especially with external RPC access available. For more details see the Node Security page.
Request:
{
"action": "work_peers"
}
{
"work_peers": [
"::ffff:172.17.0.1:7076"
]
}
work_peers_clear¶
enable_control required
Clear work peers node list until restart
Dangerous RPC calls controlled by enable_control
This RPC command/option requires enable_control to be enabled within the RPC config file. Enabling this means that anyone with access to the RPC port could potentially access wallet funds, stop the node from running and take other dangerous actions. Use caution when enabling this option, especially with external RPC access available. For more details see the Node Security page.
Request:
{
"action": "work_peers_clear"
}
{
"success": ""
}
work_validate¶
Check whether work is valid for block. Provides two values: valid_all is true if the work is valid at the current network difficulty (work can be used for any block). valid_receive is true if the work is valid for use in a receive block.
Read the details below when using this RPC in V21.
Semantics change in V21.0
In V21.0, when the optional difficulty is not given, valid is no longer included in the response.
Use the new response fields "valid_all" and "valid_receive" taking into account the subtype of the block using this work value:
- valid_all validates at the current network difficulty. As soon as the node processes the first epoch_2 block, this difficulty is increased.
- valid_receive is completely accurate only once the epoch_2 upgrade is finished. Until the upgrade is finished, it is only accurate if the account where this work will be used is already upgraded. The upgrade status of an account can be obtained from account_info. The account is upgraded if "account_version" is
"2".
Request:
{
"action": "work_validate",
"work": "2bf29ef00786a6bc",
"hash": "718CC2121C3E641059BC1C2CFC45666C99E8AE922F7A807B7D07B62C995D79E2"
}
{
"valid_all": "1",
"valid_receive": "1",
"difficulty": "fffffff93c41ec94",
"multiplier": "1.182623871097636" // calculated from the default base difficulty
}
Response up to v20.0
{
"valid": "1",
"difficulty": "fffffff93c41ec94", //
"multiplier": "9.4609" //
}
Optional "difficulty"
Difficulty value (16 hexadecimal digits string, 64 bit). Uses difficulty value to validate work. Defaults to the network base difficulty. Response includes extra field valid signifying validity at the given difficulty.
Request with given "difficulty"
{
"action": "work_validate",
"difficulty": "ffffffffffffffff",
"work": "2bf29ef00786a6bc",
"hash": "718CC2121C3E641059BC1C2CFC45666C99E8AE922F7A807B7D07B62C995D79E2"
}
{
"valid": "0",
"valid_all": "1",
"valid_receive": "1",
"difficulty": "fffffff93c41ec94",
"multiplier": "1.182623871097636"
}
Optional "multiplier"
Multiplier from base difficulty (positive number). Uses equivalent difficulty as multiplier from base difficulty to validate work.
Note: overrides the difficulty parameter.
Optional "version"
Work version string. Currently "work_1" is the default and only valid option.
Wallet RPCs¶
For development and testing only
Below are RPC commands that interact with the built-in, QT-based node wallet. This wallet is only recommended for development and testing. For production integrations, setting up custom External Management processes is required.
account_create¶
enable_control required
Creates a new account, insert next deterministic key in wallet
Dangerous RPC calls controlled by enable_control
This RPC command/option requires enable_control to be enabled within the RPC config file. Enabling this means that anyone with access to the RPC port could potentially access wallet funds, stop the node from running and take other dangerous actions. Use caution when enabling this option, especially with external RPC access available. For more details see the Node Security page.
Request:
{
"action": "account_create",
"wallet": "000D1BAEC8EC208142C99059B393051BAC8380F9B5A2E6B2489A277D81789F3F"
}
Response:
{
"account": "nano_3e3j5tkog48pnny9dmfzj1r16pg8t1e76dz5tmac6iq689wyjfpi00000000"
}
unset by default. Indicates which index to create account for starting with 0
Request:
{
"action": "account_create",
"wallet": "000D1BAEC8EC208142C99059B393051BAC8380F9B5A2E6B2489A277D81789F3F",
"index": "1"
}
Optional "work"
Boolean, true by default. Setting false disables work generation after creating account
Request:
{
"action": "account_create",
"wallet": "000D1BAEC8EC208142C99059B393051BAC8380F9B5A2E6B2489A277D81789F3F",
"work": "false"
}
account_list¶
Lists all the accounts inside wallet
Request:
{
"action": "account_list",
"wallet": "000D1BAEC8EC208142C99059B393051BAC8380F9B5A2E6B2489A277D81789F3F"
}
{
"accounts": [
"nano_3e3j5tkog48pnny9dmfzj1r16pg8t1e76dz5tmac6iq689wyjfpi00000000"
]
}
account_move¶
enable_control required
Moves accounts from source to wallet
Dangerous RPC calls controlled by enable_control
This RPC command/option requires enable_control to be enabled within the RPC config file. Enabling this means that anyone with access to the RPC port could potentially access wallet funds, stop the node from running and take other dangerous actions. Use caution when enabling this option, especially with external RPC access available. For more details see the Node Security page.
Request:
{
"action": "account_move",
"wallet": "000D1BAEC8EC208142C99059B393051BAC8380F9B5A2E6B2489A277D81789F3F",
"source": "000D1BAEC8EC208142C99059B393051BAC8380F9B5A2E6B2489A277D81789F3F",
"accounts": [
"nano_3e3j5tkog48pnny9dmfzj1r16pg8t1e76dz5tmac6iq689wyjfpi00000000"
]
}
{
"moved" : "1"
}
account_remove¶
enable_control required
Remove account from wallet
Dangerous RPC calls controlled by enable_control
This RPC command/option requires enable_control to be enabled within the RPC config file. Enabling this means that anyone with access to the RPC port could potentially access wallet funds, stop the node from running and take other dangerous actions. Use caution when enabling this option, especially with external RPC access available. For more details see the Node Security page.
Request:
{
"action": "account_remove",
"wallet": "000D1BAEC8EC208142C99059B393051BAC8380F9B5A2E6B2489A277D81789F3F",
"account": "nano_39a73oy5ungrhxy5z5oao1xso4zo7dmgpjd4u74xcrx3r1w6rtazuouw6qfi"
}
{
"removed": "1"
}
account_representative_set¶
enable_control required
Sets the representative for account in wallet
Dangerous RPC calls controlled by enable_control
This RPC command/option requires enable_control to be enabled within the RPC config file. Enabling this means that anyone with access to the RPC port could potentially access wallet funds, stop the node from running and take other dangerous actions. Use caution when enabling this option, especially with external RPC access available. For more details see the Node Security page.
Request:
{
"action": "account_representative_set",
"wallet": "000D1BAEC8EC208142C99059B393051BAC8380F9B5A2E6B2489A277D81789F3F",
"account": "nano_39a73oy5ungrhxy5z5oao1xso4zo7dmgpjd4u74xcrx3r1w6rtazuouw6qfi",
"representative": "nano_16u1uufyoig8777y6r8iqjtrw8sg8maqrm36zzcm95jmbd9i9aj5i8abr8u5"
}
{
"block": "000D1BAEC8EC208142C99059B393051BAC8380F9B5A2E6B2489A277D81789F3F"
}
Work value (16 hexadecimal digits string, 64 bit). Uses work value for block from external source and disables work precaching for this account. Not using this field re-enables work precaching.
accounts_create¶
enable_control required
Creates new accounts, insert next deterministic keys in wallet up to count
Dangerous RPC calls controlled by enable_control
This RPC command/option requires enable_control to be enabled within the RPC config file. Enabling this means that anyone with access to the RPC port could potentially access wallet funds, stop the node from running and take other dangerous actions. Use caution when enabling this option, especially with external RPC access available. For more details see the Node Security page.
Request:
{
"action": "accounts_create",
"wallet": "000D1BAEC8EC208142C99059B393051BAC8380F9B5A2E6B2489A277D81789F3F",
"count": "2"
}
{
"accounts": [
"nano_3e3j5tkog48pnny9dmfzj1r16pg8t1e76dz5tmac6iq689wyjfpi00000000",
"nano_1e5aqegc1jb7qe964u4adzmcezyo6o146zb8hm6dft8tkp79za3s00000000"
]
}
Boolean, false by default. Enables work generation after creating accounts
Request:
{
"action": "accounts_create",
"wallet": "000D1BAEC8EC208142C99059B393051BAC8380F9B5A2E6B2489A277D81789F3F",
"count": "2",
"work": "true"
}
block_create (optional wallet)¶
See block_create Node RPC command above
password_change¶
enable_control required
Changes the password for wallet to password
Dangerous RPC calls controlled by enable_control
This RPC command/option requires enable_control to be enabled within the RPC config file. Enabling this means that anyone with access to the RPC port could potentially access wallet funds, stop the node from running and take other dangerous actions. Use caution when enabling this option, especially with external RPC access available. For more details see the Node Security page.
Request:
{
"action": "password_change",
"wallet": "000D1BAEC8EC208142C99059B393051BAC8380F9B5A2E6B2489A277D81789F3F",
"password": "test"
}
{
"changed" : "1"
}
password_enter¶
Enters the password in to wallet to unlock it
Request:
{
"action": "password_enter",
"wallet": "000D1BAEC8EC208142C99059B393051BAC8380F9B5A2E6B2489A277D81789F3F",
"password": "test"
}
{
"valid": "1"
}
password_valid¶
Checks whether the password entered for wallet is valid
Request:
{
"action": "password_valid",
"wallet": "000D1BAEC8EC208142C99059B393051BAC8380F9B5A2E6B2489A277D81789F3F"
}
{
"valid" : "1"
}
receive¶
enable_control required
Receive receivable block for account in wallet. If receiving the block opens the account, sets the account representative to a wallet representative. Before v21, the representative is set to the account itself.
Dangerous RPC calls controlled by enable_control
This RPC command/option requires enable_control to be enabled within the RPC config file. Enabling this means that anyone with access to the RPC port could potentially access wallet funds, stop the node from running and take other dangerous actions. Use caution when enabling this option, especially with external RPC access available. For more details see the Node Security page.
Request:
{
"action": "receive",
"wallet": "000D1BAEC8EC208142C99059B393051BAC8380F9B5A2E6B2489A277D81789F3F",
"account": "nano_3e3j5tkog48pnny9dmfzj1r16pg8t1e76dz5tmac6iq689wyjfpi00000000",
"block": "53EAA25CE28FA0E6D55EA9704B32604A736966255948594D55CBB05267CECD48"
}
{
"block": "EE5286AB32F580AB65FD84A69E107C69FBEB571DEC4D99297E19E3FA5529547B"
}
Work value (16 hexadecimal digits string, 64 bit). Uses work value for block from external source and disables work precaching for this account. Not using this field re-enables work precaching.
receive_minimum¶
enable_control required
Returns receive minimum for node wallet
Dangerous RPC calls controlled by enable_control
This RPC command/option requires enable_control to be enabled within the RPC config file. Enabling this means that anyone with access to the RPC port could potentially access wallet funds, stop the node from running and take other dangerous actions. Use caution when enabling this option, especially with external RPC access available. For more details see the Node Security page.
Request:
{
"action": "receive_minimum"
}
{
"amount": "1000000000000000000000000"
}
receive_minimum_set¶
_ enable_control required _
Set amount as new receive minimum for node wallet until restart
Dangerous RPC calls controlled by enable_control
This RPC command/option requires enable_control to be enabled within the RPC config file. Enabling this means that anyone with access to the RPC port could potentially access wallet funds, stop the node from running and take other dangerous actions. Use caution when enabling this option, especially with external RPC access available. For more details see the Node Security page.
Request:
{
"action": "receive_minimum_set",
"amount": "1000000000000000000000000000000"
}
{
"success": ""
}
search_pending¶
Deprecated in V24.0+. Replaced by search_receivable
search_receivable¶
since V24.0, use search_pending
enable_control required
Tells the node to look for receivable blocks for any account in wallet
Dangerous RPC calls controlled by enable_control
This RPC command/option requires enable_control to be enabled within the RPC config file. Enabling this means that anyone with access to the RPC port could potentially access wallet funds, stop the node from running and take other dangerous actions. Use caution when enabling this option, especially with external RPC access available. For more details see the Node Security page.
Request:
{
"action": "search_receivable",
"wallet": "000D1BAEC8EC208142C99059B393051BAC8380F9B5A2E6B2489A277D81789F3F"
}
{
"started": "1"
}
search_pending_all¶
Deprecated in V24.0+. Replaced by search_receivable_all
search_receivable_all¶
since V24.0, use search_pending_all
enable_control required
Tells the node to look for receivable blocks for any account in all available wallets
Dangerous RPC calls controlled by enable_control
This RPC command/option requires enable_control to be enabled within the RPC config file. Enabling this means that anyone with access to the RPC port could potentially access wallet funds, stop the node from running and take other dangerous actions. Use caution when enabling this option, especially with external RPC access available. For more details see the Node Security page.
Request:
{
"action": "search_receivable_all"
}
{
"success": ""
}
send¶
enable_control required
Send amount from source in wallet to destination
Dangerous RPC calls controlled by enable_control
This RPC command/option requires enable_control to be enabled within the RPC config file. Enabling this means that anyone with access to the RPC port could potentially access wallet funds, stop the node from running and take other dangerous actions. Use caution when enabling this option, especially with external RPC access available. For more details see the Node Security page.
Use of id option is highly recommended
Integrations using the node wallet must ensure idempotency for transactions and this can be done externally if preferred. Using the id field provides this option internally and is highly recommended for all node wallet uses.
Request:
{
"action": "send",
"wallet": "000D1BAEC8EC208142C99059B393051BAC8380F9B5A2E6B2489A277D81789F3F",
"source": "nano_3e3j5tkog48pnny9dmfzj1r16pg8t1e76dz5tmac6iq689wyjfpi00000000",
"destination": "nano_3e3j5tkog48pnny9dmfzj1r16pg8t1e76dz5tmac6iq689wyjfpi00000000",
"amount": "1000000",
"id": "your-unique-id"
}
{
"block": "000D1BAEC8EC208142C99059B393051BAC8380F9B5A2E6B2489A277D81789F3F"
}
If the request times out, then the send may or may not have gone through. If you want to the ability to retry a failed send, all send calls must specify the id parameter as follows
Highly recommended "id"
You can (and should) specify a unique id for each spend to provide idempotency. That means that if you call send two times with the same id, the second request won't send any additional Nano, and will return the first block instead. The id can be any string. This may be a required parameter in the future.
If you accidentally reuse an id, the send will not go through (it will be seen as a duplicate request), so make sure your ids are unique! They must be unique per node, and are not segregated per wallet.
Using the same id for requests with different parameters (wallet, source, destination, and amount) is undefined behavior and may result in an error in the future.
Request:
{
"action": "send",
"wallet": "000D1BAEC8EC208142C99059B393051BAC8380F9B5A2E6B2489A277D81789F3F",
"source": "nano_3e3j5tkog48pnny9dmfzj1r16pg8t1e76dz5tmac6iq689wyjfpi00000000",
"destination": "nano_3e3j5tkog48pnny9dmfzj1r16pg8t1e76dz5tmac6iq689wyjfpi00000000",
"amount": "1000000",
"id": "7081e2b8fec9146e"
}
{
"block": "000D1BAEC8EC208142C99059B393051BAC8380F9B5A2E6B2489A277D81789F3F"
}
Sending the request again will yield the same block, and will not affect the ledger.
Optional "work"
Work value (16 hexadecimal digits string, 64 bit). Uses work value for block from external source and disables work precaching for this account. Not using this field re-enables work precaching.
Request:
{
"action": "send",
"wallet": "000D1BAEC8EC208142C99059B393051BAC8380F9B5A2E6B2489A277D81789F3F",
"source": "nano_3e3j5tkog48pnny9dmfzj1r16pg8t1e76dz5tmac6iq689wyjfpi00000000",
"destination": "nano_3e3j5tkog48pnny9dmfzj1r16pg8t1e76dz5tmac6iq689wyjfpi00000000",
"amount": "1000000",
"work": "2bf29ef00786a6bc"
}
sign (optional wallet)¶
See sign Node RPC command above
wallet_add¶
enable_control required
Add an adhoc private key key to wallet
Dangerous RPC calls controlled by enable_control
This RPC command/option requires enable_control to be enabled within the RPC config file. Enabling this means that anyone with access to the RPC port could potentially access wallet funds, stop the node from running and take other dangerous actions. Use caution when enabling this option, especially with external RPC access available. For more details see the Node Security page.
Request:
{
"action": "wallet_add",
"wallet": "000D1BAEC8EC208142C99059B393051BAC8380F9B5A2E6B2489A277D81789F3F",
"key": "34F0A37AAD20F4A260F0A5B3CB3D7FB50673212263E58A380BC10474BB039CE4"
}
{
"account": "nano_3e3j5tkog48pnny9dmfzj1r16pg8t1e76dz5tmac6iq689wyjfpi00000000"
}
Boolean, false by default. Disables work generation after adding account
Request:
{
"action": "wallet_add",
"wallet": "000D1BAEC8EC208142C99059B393051BAC8380F9B5A2E6B2489A277D81789F3F",
"key": "34F0A37AAD20F4A260F0A5B3CB3D7FB50673212263E58A380BC10474BB039CE4",
"work": "false"
}
wallet_add_watch¶
enable_control required
Add watch-only accounts to wallet
Dangerous RPC calls controlled by enable_control
This RPC command/option requires enable_control to be enabled within the RPC config file. Enabling this means that anyone with access to the RPC port could potentially access wallet funds, stop the node from running and take other dangerous actions. Use caution when enabling this option, especially with external RPC access available. For more details see the Node Security page.
Request:
{
"action": "wallet_add_watch",
"wallet": "000D1BAEC8EC208142C99059B393051BAC8380F9B5A2E6B2489A277D81789F3F",
"accounts": [
"nano_3e3j5tkog48pnny9dmfzj1r16pg8t1e76dz5tmac6iq689wyjfpi00000000",
"nano_111111111111111111111111111111111111111111111111111000000000"
]
}
{
"success" : ""
}
wallet_balances¶
Returns how many raw is owned and how many have not yet been received by all accounts in wallet
Includes unconfirmed blocks
This call may return results that include unconfirmed blocks, so it should not be used in any processes or integrations requiring only details from blocks confirmed by the network.
The term pending was deprecated in favor of receivable. For compatibility reasons both terms are still available for many calls and in responses. More details here.
Request:
{
"action": "wallet_balances",
"wallet": "000D1BAEC8EC208142C99059B393051BAC8380F9B5A2E6B2489A277D81789F3F"
}
{
"balances" : {
"nano_3e3j5tkog48pnny9dmfzj1r16pg8t1e76dz5tmac6iq689wyjfpi00000000": {
"balance": "10000",
"pending": "10000",
"receivable": "10000"
}
}
}
Number (128 bit, decimal). Returns wallet accounts balances more or equal to threshold
wallet_change_seed¶
enable_control required
Changes seed for wallet to seed. Notes: Clear all deterministic accounts in wallet! To restore account from new seed use RPC accounts_create.
last_restored_account and restored_count fields in response returned since
Dangerous RPC calls controlled by enable_control
This RPC command/option requires enable_control to be enabled within the RPC config file. Enabling this means that anyone with access to the RPC port could potentially access wallet funds, stop the node from running and take other dangerous actions. Use caution when enabling this option, especially with external RPC access available. For more details see the Node Security page.
Request:
{
"action": "wallet_change_seed",
"wallet": "000D1BAEC8EC208142C99059B393051BAC8380F9B5A2E6B2489A277D81789F3F",
"seed": "74F2B37AAD20F4A260F0A5B3CB3D7FB51673212263E58A380BC10474BB039CEE"
}
{
"success" : "",
"last_restored_account": "nano_1mhdfre3zczr86mp44jd3xft1g1jg66jwkjtjqixmh6eajfexxti7nxcot9c",
"restored_count": "1"
}
Optional "count"
Number, 0 by default. Manually set count of accounts to restore from seed
wallet_contains¶
Check whether wallet contains account
Request:
{
"action": "wallet_contains",
"wallet": "000D1BAEC8EC208142C99059B393051BAC8380F9B5A2E6B2489A277D81789F3F",
"account": "nano_3e3j5tkog48pnny9dmfzj1r16pg8t1e76dz5tmac6iq689wyjfpi00000000"
}
{
"exists": "1"
}
wallet_create¶
enable_control required
Creates a new random wallet id
Dangerous RPC calls controlled by enable_control
This RPC command/option requires enable_control to be enabled within the RPC config file. Enabling this means that anyone with access to the RPC port could potentially access wallet funds, stop the node from running and take other dangerous actions. Use caution when enabling this option, especially with external RPC access available. For more details see the Node Security page.
Request:
{
"action": "wallet_create"
}
{
"wallet": "000D1BAEC8EC208142C99059B393051BAC8380F9B5A2E6B2489A277D81789F3F"
}
Seed value (64 hexadecimal digits string, 256 bit). Changes seed for a new wallet to seed, returning last restored account from given seed & restored count
wallet_destroy¶
enable_control required
Destroys wallet and all contained accounts
Dangerous RPC calls controlled by enable_control
This RPC command/option requires enable_control to be enabled within the RPC config file. Enabling this means that anyone with access to the RPC port could potentially access wallet funds, stop the node from running and take other dangerous actions. Use caution when enabling this option, especially with external RPC access available. For more details see the Node Security page.
Request:
{
"action": "wallet_destroy",
"wallet": "000D1BAEC8EC208142C99059B393051BAC8380F9B5A2E6B2489A277D81789F3F"
}
{
"destroyed": "1"
}
wallet_export¶
Return a json representation of wallet
Request:
{
"action": "wallet_export",
"wallet": "000D1BAEC8EC208142C99059B393051BAC8380F9B5A2E6B2489A277D81789F3F"
}
{
"json" : "{\"0000000000000000000000000000000000000000000000000000000000000000\": \"0000000000000000000000000000000000000000000000000000000000000001\"}"
}
wallet_frontiers¶
Returns a list of pairs of account and block hash representing the head block starting for accounts from wallet
Request:
{
"action": "wallet_frontiers",
"wallet": "000D1BAEC8EC208142C99059B393051BAC8380F9B5A2E6B2489A277D81789F3F"
}
{
"frontiers": {
"nano_3e3j5tkog48pnny9dmfzj1r16pg8t1e76dz5tmac6iq689wyjfpi00000000": "000D1BAEC8EC208142C99059B393051BAC8380F9B5A2E6B2489A277D81789F3F"
}
}
wallet_history¶
Reports send/receive information for accounts in wallet. Change blocks are skipped, open blocks will appear as receive. Response will start with most recent blocks according to local ledger.
Includes unconfirmed blocks
This call may return results that include unconfirmed blocks, so it should not be used in any processes or integrations requiring only details from blocks confirmed by the network.
Request:
{
"action": "wallet_history",
"wallet": "000D1BAEC8EC208142C99059B393051BAC8380F9B5A2E6B2489A277D81789F3F"
}
{
"history":
[
{
"type": "send",
"account": "nano_1qato4k7z3spc8gq1zyd8xeqfbzsoxwo36a45ozbrxcatut7up8ohyardu1z",
"amount": "30000000000000000000000000000000000",
"block_account": "nano_1ipx847tk8o46pwxt5qjdbncjqcbwcc1rrmqnkztrfjy5k7z4imsrata9est",
"hash": "87434F8041869A01C8F6F263B87972D7BA443A72E0A97D7A3FD0CCC2358FD6F9",
"local_timestamp": "1527698508"
},
{
"type": "send",
"account": "nano_38ztgpejb7yrm7rr586nenkn597s3a1sqiy3m3uyqjicht7kzuhnihdk6zpz",
"amount": "40000000000000000000000000000000000",
"block_account": "nano_1ipx847tk8o46pwxt5qjdbncjqcbwcc1rrmqnkztrfjy5k7z4imsrata9est",
"hash": "CE898C131AAEE25E05362F247760F8A3ACF34A9796A5AE0D9204E86B0637965E",
"local_timestamp": "1527698492"
}
]
}
UNIX timestamp (number), 0 by default. Return only accounts modified in local database after specific timestamp
wallet_info¶
Given a wallet id, from all of the accounts in the wallet, returns:
- Sum of their balance amounts
- Total number of accounts as accounts_count
- Number of deterministic accounts as deterministic_count
- Number of adhoc (non-deterministic) accounts as adhoc_count
- Index of last account derived from the walet seed as deterministic_index (equal to deterministic accounts number if no accounts were removed)
- Sum of all frontier block heights as accounts_block_count
- Sum of confirmed block heights as accounts_cemented_block_count
Includes unconfirmed blocks
This call may return results that include unconfirmed blocks, so it should not be used in any processes or integrations requiring only details from blocks confirmed by the network.
The term pending was deprecated in favor of receivable. For compatibility reasons both terms are still available for many calls and in responses. More details here.
Request:
{
"action": "wallet_info",
"wallet": "000D1BAEC8EC208142C99059B393051BAC8380F9B5A2E6B2489A277D81789F3F"
}
{
"balance": "10000",
"pending": "10000",
"receivable": "10000",
"accounts_count": "3",
"adhoc_count": "1",
"deterministic_count": "2",
"deterministic_index": "2",
"accounts_block_count": "14",
"accounts_cemented_block_count": "13"
}
wallet_ledger¶
enable_control required
Returns frontier, open block, change representative block, balance, last modified timestamp from local database & block count for accounts from wallet
Includes unconfirmed blocks
This call may return results that include unconfirmed blocks, so it should not be used in any processes or integrations requiring only details from blocks confirmed by the network.
Dangerous RPC calls controlled by enable_control
This RPC command/option requires enable_control to be enabled within the RPC config file. Enabling this means that anyone with access to the RPC port could potentially access wallet funds, stop the node from running and take other dangerous actions. Use caution when enabling this option, especially with external RPC access available. For more details see the Node Security page.
The term pending was deprecated in favor of receivable. For compatibility reasons both terms are still available for many calls and in responses. More details here.
Request:
{
"action": "wallet_ledger",
"wallet": "000D1BAEC8EC208142C99059B393051BAC8380F9B5A2E6B2489A277D81789F3F"
}
{
"accounts": {
"nano_11119gbh8hb4hj1duf7fdtfyf5s75okzxdgupgpgm1bj78ex3kgy7frt3s9n": {
"frontier": "E71AF3E9DD86BBD8B4620EFA63E065B34D358CFC091ACB4E103B965F95783321",
"open_block": "643B77F1ECEFBDBE1CC909872964C1DBBE23A6149BD3CEF2B50B76044659B60F",
"representative_block": "643B77F1ECEFBDBE1CC909872964C1DBBE23A6149BD3CEF2B50B76044659B60F",
"balance": "0",
"modified_timestamp": "1511476234",
"block_count": "2"
}
}
}
Booleans, false by default. Additionally returns representative, voting weight, receivable balance for each account
Request:
{
"action": "wallet_ledger",
"wallet": "000D1BAEC8EC208142C99059B393051BAC8380F9B5A2E6B2489A277D81789F3F",
"representative": "true",
"weight": "true",
"receivable": "true"
}
{
"accounts": {
"nano_11119gbh8hb4hj1duf7fdtfyf5s75okzxdgupgpgm1bj78ex3kgy7frt3s9n": {
"frontier": "E71AF3E9DD86BBD8B4620EFA63E065B34D358CFC091ACB4E103B965F95783321",
"open_block": "643B77F1ECEFBDBE1CC909872964C1DBBE23A6149BD3CEF2B50B76044659B60F",
"representative_block": "643B77F1ECEFBDBE1CC909872964C1DBBE23A6149BD3CEF2B50B76044659B60F",
"balance": "0",
"modified_timestamp": "1511476234",
"block_count": "2",
"representative": "nano_1anrzcuwe64rwxzcco8dkhpyxpi8kd7zsjc1oeimpc3ppca4mrjtwnqposrs",
"weight": "0",
"pending": "0",
"receivable": "0"
}
}
}
UNIX timestamp (number), 0 by default. Return only accounts modified in local database after specific timestamp
wallet_lock¶
enable_control required
Locks wallet
Dangerous RPC calls controlled by enable_control
This RPC command/option requires enable_control to be enabled within the RPC config file. Enabling this means that anyone with access to the RPC port could potentially access wallet funds, stop the node from running and take other dangerous actions. Use caution when enabling this option, especially with external RPC access available. For more details see the Node Security page.
Request:
{
"action": "wallet_lock",
"wallet": "000D1BAEC8EC208142C99059B393051BAC8380F9B5A2E6B2489A277D81789F3F"
}
{
"locked": "1"
}
wallet_locked¶
Checks whether wallet is locked
Request:
{
"action": "wallet_locked",
"wallet": "000D1BAEC8EC208142C99059B393051BAC8380F9B5A2E6B2489A277D81789F3F"
}
{
"locked": "0"
}
wallet_pending¶
Deprecated in V24.0+. Replaced by wallet_receivable
wallet_receivable¶
since V24.0, use wallet_pending for V23.3 and below
enable_control required
Returns a list of block hashes which have not yet been received by accounts in this wallet
Dangerous RPC calls controlled by enable_control
This RPC command/option requires enable_control to be enabled within the RPC config file. Enabling this means that anyone with access to the RPC port could potentially access wallet funds, stop the node from running and take other dangerous actions. Use caution when enabling this option, especially with external RPC access available. For more details see the Node Security page.
Request:
{
"action": "wallet_receivable",
"wallet": "000D1BAEC8EC208142C99059B393051BAC8380F9B5A2E6B2489A277D81789F3F",
"count": "1"
}
{
"blocks": {
"nano_1111111111111111111111111111111111111111111111111117353trpda": ["142A538F36833D1CC78B94E11C766F75818F8B940771335C6C1B8AB880C5BB1D"],
"nano_3t6k35gi95xu6tergt6p69ck76ogmitsa8mnijtpxm9fkcm736xtoncuohr3": ["4C1FEEF0BEA7F50BE35489A1233FE002B212DEA554B55B1B470D78BD8F210C74"]
}
}
Number (128 bit, decimal). Returns a list of receivable block hashes with amount more or equal to threshold
Request:
{
"action": "wallet_receivable",
"wallet": "000D1BAEC8EC208142C99059B393051BAC8380F9B5A2E6B2489A277D81789F3F",
"count": "1",
"threshold": "1000000000000000000000000"
}
{
"blocks": {
"nano_1111111111111111111111111111111111111111111111111117353trpda": {
"142A538F36833D1CC78B94E11C766F75818F8B940771335C6C1B8AB880C5BB1D": "6000000000000000000000000000000"
},
"nano_3t6k35gi95xu6tergt6p69ck76ogmitsa8mnijtpxm9fkcm736xtoncuohr3": {
"4C1FEEF0BEA7F50BE35489A1233FE002B212DEA554B55B1B470D78BD8F210C74": "106370018000000000000000000000000"
}
}
}
Boolean, false by default. Returns a list of receivable block hashes with amount and source accounts
Request:
{
"action": "wallet_receivable",
"wallet": "000D1BAEC8EC208142C99059B393051BAC8380F9B5A2E6B2489A277D81789F3F",
"count": "1",
"source": "true"
}
{
"blocks": {
"nano_1111111111111111111111111111111111111111111111111117353trpda": {
"142A538F36833D1CC78B94E11C766F75818F8B940771335C6C1B8AB880C5BB1D": {
"amount": "6000000000000000000000000000000",
"source": "nano_3dcfozsmekr1tr9skf1oa5wbgmxt81qepfdnt7zicq5x3hk65fg4fqj58mbr"
}
},
"nano_3t6k35gi95xu6tergt6p69ck76ogmitsa8mnijtpxm9fkcm736xtoncuohr3": {
"4C1FEEF0BEA7F50BE35489A1233FE002B212DEA554B55B1B470D78BD8F210C74": {
"amount": "106370018000000000000000000000000",
"source": "nano_13ezf4od79h1tgj9aiu4djzcmmguendtjfuhwfukhuucboua8cpoihmh8byo"
}
}
}
}
Boolean, false by default. Include active blocks without finished confirmations
Request:
{
"action": "wallet_receivable",
"wallet": "000D1BAEC8EC208142C99059B393051BAC8380F9B5A2E6B2489A277D81789F3F",
"count": "1",
"include_active": "true"
}
Optional "min_version"
Boolean, false by default. Returns the minimum version (epoch) of a block which can pocket this receivable block.
Optional "include_only_confirmed"
Boolean, true by default (), previously false by default. Only returns confirmed blocks but with the caveat that their confirmation height might not be up-to-date yet. If false, unconfirmed blocks will also be returned.
wallet_representative¶
Returns the default representative for wallet
Request:
{
"action": "wallet_representative",
"wallet": "000D1BAEC8EC208142C99059B393051BAC8380F9B5A2E6B2489A277D81789F3F"
}
{
"representative": "nano_3e3j5tkog48pnny9dmfzj1r16pg8t1e76dz5tmac6iq689wyjfpi00000000"
}
wallet_representative_set¶
enable_control required
Sets the default representative for wallet (used only for new accounts, already existing accounts use already set representatives)
Dangerous RPC calls controlled by enable_control
This RPC command/option requires enable_control to be enabled within the RPC config file. Enabling this means that anyone with access to the RPC port could potentially access wallet funds, stop the node from running and take other dangerous actions. Use caution when enabling this option, especially with external RPC access available. For more details see the Node Security page.
Request:
{
"action": "wallet_representative_set",
"wallet": "000D1BAEC8EC208142C99059B393051BAC8380F9B5A2E6B2489A277D81789F3F",
"representative": "nano_3e3j5tkog48pnny9dmfzj1r16pg8t1e76dz5tmac6iq689wyjfpi00000000"
}
{
"set": "1"
}
Optional "update_existing_accounts"
Boolean, false by default. Change representative for existing accounts in wallet. May require a lot of time to complete for large wallets due to work generation for change type state blocks
wallet_republish¶
enable_control required
Rebroadcast blocks for accounts from wallet starting at frontier down to count to the network
Dangerous RPC calls controlled by enable_control
This RPC command/option requires enable_control to be enabled within the RPC config file. Enabling this means that anyone with access to the RPC port could potentially access wallet funds, stop the node from running and take other dangerous actions. Use caution when enabling this option, especially with external RPC access available. For more details see the Node Security page.
Request:
{
"action": "wallet_republish",
"wallet": "000D1BAEC8EC208142C99059B393051BAC8380F9B5A2E6B2489A277D81789F3F",
"count": "2"
}
{
"blocks": [
"991CF190094C00F0B68E2E5F75F6BEE95A2E0BD93CEAA4A6734DB9F19B728948",
"A170D51B94E00371ACE76E35AC81DC9405D5D04D4CEBC399AEACE07AE05DD293",
"90D0C16AC92DD35814E84BFBCC739A039615D0A42A76EF44ADAEF1D99E9F8A35"
]
}
wallet_work_get¶
enable_control required
Returns a list of pairs of account and work from wallet
Dangerous RPC calls controlled by enable_control
This RPC command/option requires enable_control to be enabled within the RPC config file. Enabling this means that anyone with access to the RPC port could potentially access wallet funds, stop the node from running and take other dangerous actions. Use caution when enabling this option, especially with external RPC access available. For more details see the Node Security page.
Request:
{
"action": "wallet_work_get",
"wallet": "000D1BAEC8EC208142C99059B393051BAC8380F9B5A2E6B2489A277D81789F3F"
}
{
"works": {
"nano_1111111111111111111111111111111111111111111111111111hifc8npp": "432e5cf728c90f4f"
}
}
work_get¶
enable_control required
Retrieves work for account in wallet
Dangerous RPC calls controlled by enable_control
This RPC command/option requires enable_control to be enabled within the RPC config file. Enabling this means that anyone with access to the RPC port could potentially access wallet funds, stop the node from running and take other dangerous actions. Use caution when enabling this option, especially with external RPC access available. For more details see the Node Security page.
Request:
{
"action": "work_get",
"wallet": "000D1BAEC8EC208142C99059B393051BAC8380F9B5A2E6B2489A277D81789F3F",
"account": "nano_1111111111111111111111111111111111111111111111111111hifc8npp"
}
{
"work": "432e5cf728c90f4f"
}
work_set¶
enable_control required
Set work for account in wallet
Dangerous RPC calls controlled by enable_control
This RPC command/option requires enable_control to be enabled within the RPC config file. Enabling this means that anyone with access to the RPC port could potentially access wallet funds, stop the node from running and take other dangerous actions. Use caution when enabling this option, especially with external RPC access available. For more details see the Node Security page.
Request:
{
"action": "work_set",
"wallet": "000D1BAEC8EC208142C99059B393051BAC8380F9B5A2E6B2489A277D81789F3F",
"account": "nano_1111111111111111111111111111111111111111111111111111hifc8npp",
"work": "0000000000000000"
}
{
"success": ""
}
Unit Conversion RPCs¶
nano_to_raw¶
Convert nano amount (10^30 raw) into raw (10^0)
Request:
{
"action": "nano_to_raw",
"amount": "1"
}
{
"amount": "1000000000000000000000000000000"
}
raw_to_nano¶
Convert raw amount (10^0) into nano (10^30 raw)
Request:
{
"action": "raw_to_nano",
"amount": "1000000000000000000000000000000"
}
{
"amount": "1"
}
Deprecated RPCs¶
active_difficulty¶
deprecated
Returns the difficulty values (16 hexadecimal digits string, 64 bit) and related multiplier from base difficulty.
| Field Name | Response Details |
|---|---|
multiplier |
Multiplier of the network_current from the base difficulty of network_minimum for comparison. Note that in V22.0+ this will always be 1 (see below for details). |
network_minimum |
Minimum difficulty required for the network for all block types |
network_current |
V22.0+ same minimum difficulty above due to the deprecation of active difficulty calculations used for prioritization in previous versions; up to V21.3 10 second trended average of adjusted difficulty seen on prioritized transactions, refreshed every 500ms |
network_receive_minimum |
Lower difficulty threshold exclusively for receive blocks |
network_receive_current |
V22.0+ same minimum receive difficulty above due to the deprecation of active difficulty calculations used for prioritization in previous versions; up to V21.3 10 second trended average of adjusted difficulty seen on prioritized receive transactions, refreshed every 500ms |
Constant values returned
Due to the deprecation of active difficulty calculations as of V22.0, this RPC call will return constant values as seen below. These values can be used as difficulty thresholds for the respective block types, but this RPC call should not be used for retrieving these values going forward.
Request:
{
"action": "active_difficulty"
}
Response:
{
"deprecated": "1",
"network_minimum": "fffffff800000000",
"network_receive_minimum": "fffffe0000000000",
"network_current": "fffffff800000000",
"network_receive_current": "fffffe0000000000",
"multiplier": "1"
}
Optional "include_trend"
Boolean, false by default. Also returns the trend of difficulty seen on the network as a list of multipliers. Sampling occurs every 500ms. The list is ordered such that the first value is the most recent sample.
Note: Before v20, the sampling period was between 16 and 36 seconds.
Request:
{
"action": "active_difficulty",
"include_trend": "true"
}
Response:
{
...,
"difficulty_trend": [
"1.156096135149775",
"1.190133894573061",
"1.135567138563921",
"1.000000000000000",
"...",
"1.000000000000000"
]
}
history¶
Deprecated: please use account_history instead. It provides a head option which is identical to the history hash option.
krai_from_raw¶
Divide a raw amount down by the krai ratio.
Request:
{
"action": "krai_from_raw",
"amount": "1000000000000000000000000000"
}
{
"amount": "1"
}
krai_to_raw¶
Multiply an krai amount by the krai ratio.
Request:
{
"action": "krai_to_raw",
"amount": "1"
}
{
"amount": "1000000000000000000000000000"
}
mrai_from_raw¶
Divide a raw amount down by the Mrai ratio.
Request:
{
"action": "mrai_from_raw",
"amount": "1000000000000000000000000000000"
}
{
"amount": "1"
}
mrai_to_raw¶
Multiply an Mrai amount by the Mrai ratio.
Request:
{
"action": "mrai_to_raw",
"amount": "1"
}
{
"amount": "1000000000000000000000000000000"
}
rai_from_raw¶
Divide a raw amount down by the rai ratio.
Request:
{
"action": "rai_from_raw",
"amount": "1000000000000000000000000"
}
{
"amount": "1"
}
rai_to_raw¶
Multiply an rai amount by the rai ratio.
Request:
{
"action": "rai_to_raw",
"amount": "1"
}
{
"amount": "1000000000000000000000000"
}
Removed RPCs¶
Removed in v24¶
No RPCs have been removed in V24